Stingl Systems GmbH

In order to meet the constantly growing safety requirements of the lift industry, Stingl has developed a telescopic fall protection device (patent pending), which can be used during shell construction...

Telescopic work scaffolding made of glass reinforced polyester (GRP), which can be used in various shafts. Stingl - mobil PANO can be installed at any shaft door opening independent of the number of l...

Lengthwise telescopic working platform made of glass-fibre reinforced plastic (GRP), which can be used for work in shafts. Stingl-mobil can be installed at any shaft door opening, regardless of the fl...

In addition to the plug-in anchor scaffold shoe, the universal scaffold shoe is a safe and reinforced scaffold support in the area of lift, chimney and ventilation shafts. Due to the small external di...

Stationary, inclineable aluminum ladder with contact-protected safety suspension. Ideal for narrow shaft conditions. The safety suspension is made of steel. An electrical contact which stops lift oper...

For the use of the folding ladder type E, a shaft depth of at least 1450 mm is required. When fully unfolded and automatically locked, the ladder has a vertical height of approx. 2200 mm. The ladder r...

Multi-purpose ladder made of glass fibre reinforced polyester, which can be used as a stepladder and a single ladder. The TÜV Product Service GmbH Munich has approved the "type-tested" mark with...

Material:
stiles made of corrosion-resistant light metal rectangular tube, stable wide rungs, steps riveted several times. Ladder complies with DIN and BGV D 36.

Aluminium telescopic ladder, 4-section, suitable for use on stairs, can be folded in the middle by means of automatically locking steel hinges, both outer sections can be telescopically extended at a...

Fixed version (fully galvanised, with fixing material)
The square posts are screwed onto the car roof according to the space and load possibilities. The cross struts can be short...

Lochblechkasten zweiteilig, verzinkt, wahlweise in zwei Größen. Die Abdeckung für den Geschwindigkeitsbegrenzer ist in einem Intervall von 120 - 190 mm bzw. 200 mm verstellbar!

• For example, position switch, lever with roll, lever actuation, metal lever with rubber roll, D = 50, sliding contact,2-pin, 1 x NC + 1 x NO .
• Position switch with roller lever, ad...