Stingl Systems GmbH

Products and Services by Stingl Systems GmbH (44)

  • made of aluminium
  • anodized: silver-coloured bronze-coloured
  • powder-coating with RAL colours possible
  • insect grille made of stainless steel
  • depth of in...
T-head and hammer head bolts are used in connection with Halfen/Unistrut channels (e.g. HM and HTA ) and allow, for example, the fastening of lift guide rails. The bolts can be placed flexibly in the...
Pfeifer waved anchors are proven load Hooks out of the Pfeifer System. Due to their design, the safe transmission of forces into the concrete is guaranteed.

Material:
Galvanized...
Light curtain pair consisting of:
  • Sender and receiver,
  • 94 beams, 17 diodes
  • Measures: 2.000 x 38 x 9 mm
  • Active protection height: 20 –1.841 mm
  • Aut...
Telescopic work scaffold made of glass reinforced polyester (GRP), which can be used in various shafts. Stingl - mobil can be installed at any shaft door opening independent of the number of landings....
Telescopic work scaffolding made of glass reinforced polyester (GRP), which can be used in various shafts. Stingl - mobil PANO can be installed at any shaft door opening independent of the number of l...
Ceiling hooks
The Pfeifer flat steel anchor is ideal for installation in concrete parts with low heights. Due to its design, the flat steel plate allows the positioning of additional reinforcement bars. Thus a safe...
  • 4-function pit control unit with 40mm emergency stop switch, with viewing window, released by turning, 1 x NC, emergency call button, 1 x NO, light sensor, 1 x NO, and shockproof socket.
HALFEN DYNAGRIP anchor channels are a newdevelopment for applications with high loads, wherechannel is cast in vertically. These high performancechannels can even absorb dynamic load componentsof up t...
Telescopic beams with pressing mechanism allow the fast and safe protection of builders openings and lift doors. They can be used during work in unfinished buildings or for modernisation and repair wo...
Fixed version (fully galvanised, with fixing material)
The vertical supports can be fitted on the car roof wherever space is available. Excentrical positioning is possibledue to the fact,...

News

Space-saving acrylic glass plates with embedded LEDs as energy-saving illumination of lift cars and lift door entrance areas: A new, innovative 3D laser v-cut technology allows an extremely even light distribution all over the whole glass surface
Address
Dimbacher Strasse 25
74182
Obersulm
Germany
Business Type
Distributor
Export Regions
Europe
Foundation
1979
Management
Dipl. oec. Alexander Stingl
Dipl.Oec Dirk Schöffler
Employees
12

About Stingl Systems GmbH

Stingl is a well respected name in the specialised area of lift shaft and escalator equipment.

Stingl Systems represents the operating arm for all international business relations. Our firm has been supplying lift companies and building contractors with high quality products in Germany and the rest of Europe for more than 20 years.

Long-standing experience in the lift industry and our complete customer-orientation enable us to guarantee the reliable execution of orders and just-in-time delivery of our products on site or stock.