Schuetz Messtechnik GmbH

Cable holding device featuring Water flow or reposing Air system

The precision holding device PWD2000/P is used for the determination of the electric resistance per meter o...

• Holds diameters from 10 mm² to 1200 mm²
• Current max. current 50 A
• Integrated water flow...

• Portable system, can be used with any stranding machine.
• Features measurement during cable manufacturing process
• Supports different cable...

• Holds diameters from 0,1 mm² to 100 mm²
• Max. current of 100 A
• precise distance between potential tap of 1000 mm

for extremely thin wires – from 0.03 mm to 3 mm

The ML1000-3F resistance measurement holding device is used for the measurement of the electric resistance of samples...

• Measuring range from 100 μW – 10 kW,decadic
• Overrange up to 80 %
• max. resolution of 10nΩ
• Display 4 &...

• Measuring range from 1 mΩ – 10 kΩ,decadic
• Overrange up to 80 %
• max. resolution of 100 nΩ
• Display LED, 4...

The surface quality and the efficiency in surface conditions of sheet Micro Ohmmeter metal / plates can measure with the resistance measurement system MRP29HY.

The MRP29...

Detecting the quality of carbon strips

The MR12SPX and its measuring probe are used for inspection and quality control of carbon strips of current collectors used by electr...

Using a special 4-pole contact probe the MR-1 is Surface resistance meters used for the determination of a sufficient electromagnetic compatibility of metal-coated plastic cases.

The MR-1 i...

The MRC 100S-BD-3 Bounding Tester is a battery-powered portable digital ohmmeter, which can be used, for example, for testing the ground connection in any section of an aircraft using different mea...

The MICRO-OHMMETER MR5-200C is used to determine electric resistances on very low – resistance objects (e. g. bus bars, any connectors) while using a very high, continous flowing measurement...