Catalog

Schuetz Messtechnik GmbH

Schuetz Messtechnik GmbH

  • DIN EN ISO 9001

Schuetz Messtechnik GmbH

  • DIN EN ISO 9001

Back to the overview

Cable Holding device (MAT 1000) by Schuetz Messtechnik GmbH

Product inquiry  

The MAT1000 resistance measurement holding device is used for the measurement of the electric resistance of samples of cables, wires or other material during the inspection of incoming goods, manufacturing control applications and quality control. The test object, the so-called meter sample of a cable or wire is fixed in the holding device, and the electric resistance between the two potential taps, which have a distance of exactly 1000 mm, is guaranteed by the distance between the potential tap and the supply terminals. It is roughly eight times the largest allowable diameter.

In particular in combination with instruments of the MR200/250/300C-A series, electric resistances ranging from less than 100 mΩ up to 200 mΩ per meter can be measured with the MAT1000, which corresponds to cable sizes ranging from approx. 0.1 mm² up to more than 100 mm². An even current distribution, which is a pre-condition for highly accurate measurements, is guaranteed by the distance between the potential tap and the supply terminals. It is roughly eight times the largest allowable diameter.

Product inquiry  

More Products in the Area of Transducers

Cable Holding device (PWD 2000 P/L)

The precision holding device PWD2000/P is used for the determination of the electric resistance per meter of power and medium voltage cables. The measurement is based on the 4-pole method according...

Cable Holding device (PWD 3000 Cu / Cu-Al)

The precision holding device PWD 3000 is used for the determination of the electric resistance per meter of power and medium voltage cables. The measurement is based on the 4-pole method according...

Cable Holding device (MAT 2000 T)

The MAT2000T is used to determine the electrical cable resistance per 1000 m (US model per 1000 ft) of high- and mid- range power cables without cutting the cable. Using the 4 pole measuring technique...

Cable Holding device (ML 1000)

The ML1000-3F resistance measurement holding device is used for the measurement of the electric resistance of samples of cables, wires or other material during the inspection of incoming goods, manufa...