Stingl Systems GmbH

Plastic, for rail widths of 5-16mm, diameter 160mm, height 50mm, optionally with 3 plastic bottles incl. screw cap LDPE and flat seal 3/4", made of PE, soft, completely ready for installation.
<...

Material:

• Plastic tubes 80 x 30 x 2 screwed into 2 webbing straps.
• Overall dimensions (L x W x H): approx. 2,150 x 1,500 x 35 mm.

The PFEIFER Waved Anchor short is part of the tested PFEIFER Thread System. The forces are safely transferred into the concrete by the wave shape.

Material:
Sleeve ma...

PFEIFER Flat Steel Anchor is particularly suitable for thin ceilings due to its low overall height. The welded flat steel and the appropriate tensile reinforcement above it ensure that the force is tr...

The anchoring plate is used e.g. for steel shafts in lift construction. As a rule, four anchoring plates are concreted flush in the shaft floor. The long dimensioned head anchors allow a good connecti...

• Pit control unit, 4-digit, with emergency stop switch, 40 mm, with viewing window, rotation-locked, 1 NC, emergency call pushbutton 1 NO, light pushbutton 1 NO and socket outlet.
• P...

Aluminium box for your high quality tools and lifting equipment. Indispensable for safe packing, storage and transport. The goods to be transported are optimally protected, even on long journeys and i...

Outer dimensions (LxWxH) 1070x680x450 mm, inner dimensions (LxWxH) 1020x570x310 mm, for mobile Stingl working platforms, material: plywood IPPC standard

e.g. inspection control 7-digit, oblong housing, pushbutton white travel, 1 NO, cam switch 0-1 latching, 3x NC + 3x NO, pushbutton white with arrow up, 2 NO, pushbutton black with arrow down, 2 NO, do...

Basic set for a counterweight enclosure up to a width of max. 1,240 mm and a depth of max. 450 mm, consisting of 8 perforated panel pieces and fixing accessories. Optionally, a maximum width of 1,600...

• Galvanized steel
• Interval 700 to 1,200 mm: Packing size 800 x 100 x 50 mm, weight approx. 7.5 kg
• Interval 1,000 to 1,500 mm: Packing size 1,100 x 100 x 50 mm, weight appr...

Protection device according to the harmonized regulations of EN 81/1 at the point of contact of the ropes of traction sheaves and deflection pulleys. A left or right version is available.

...