JAKOB Antriebstechnik GmbH

JAKOB Antriebstechnik GmbH

JAKOB Antriebstechnik GmbH

18.12.2020 02:12

Stainless and convenient. JAKOB Antriebstechnik now offers three stainless steel couplings as standard series.

Including the metal bellows couplings KG-VA and KGH-VA as well as the WD-VA series of distance couplings, which is manufactured in the extremely easy-to-assemble split-hub design.

Assembly and disassembly of the coupling is no longer a problem, even in confined installation conditions. The fixed hub halves are placed on the shaft and screwed with the loose half-shells. Especially in the case of fixed shaft journals, the service case can mean that the drive and / or output unit have to be dismantled in a complicated manner, which is thus dispensed with. Thanks to the stainless steel construction, it is also ideally suited for applications in the food sector.
The KG-VA series can be used up to 350 ° C, with shaft diameters from 10 - 90 mm and torque ranges from 30 to 1000 Nm.

The KGH-VA series is wear-free and maintenance-free, can be used up to 350 ° C, includes shaft diameters from 7 - 85 mm, torque ranges from 10 to 1200 Nm and is available in variable lengths with 2 or 4-convoluted bellows.

The WD-VA distance coupling is available in variable lengths up to 3m and offers backlash-free torque transmission. It can also be used at temperatures of up to 350 ° C and includes shaft diameters from 7 - 85 mm with torque ranges from 10 - 1200 Nm.

More News

The machining of large workpieces presents its own challenges. Depending on the nature of the workpiece, very high clamping forces must be applied. Clamped with face plates or claw boxes, the processing time can also be several days and shift changes. Conventional clamping has various disadvantages. Fluctuations in the clamping force arise due to the generation of pretensioning forces that are prone to losses. An inhomogeneous state of tension in the parting line and variable generation of clamping force by different users are also disadvantageous. Automatic loosening due to vibrations is also possible.
Special high-speed test benches are used to test bearings.
In order to meet the ever increasing demands for higher performance, JAKOB Antriebstechnik offers the metal bellows coupling KPP. Its rated torque is above 600 Nm and the maximum torque at approx. 1200 Nm.

03.12.2020 02:12

Show teeth!
Toothed clutches for your gearbox solution

23.11.2020 02:11

ZSF - Fully clamped
The hydromechanical spring-loaded cylinders of the ZSF series from JAKOB Antriebstechnik offer robust and reliable clamping elements. These spring-loaded systems can be used wherever displaceable or movable machine parts must be temporarily clamped or locked. Other applications can be found in jig construction and for workpiece or tool clamping.
In order to find the right clutch for a drive train some factors have to be taken into account. The required torque range, the offset and the ambient temperatures of the clutch are particularly important.