Thermik Gerätebau GmbH

Products and Services by Thermik Gerätebau GmbH (22)

General areas of application


PTC thermistors are heat-sensitive sensors whose resistance increases with temperature, and can be used in almost all areas where a digital temperature measu...

Where possible, the PTCs are to be inserted parallel to the coil. As a result, when shaping the coil ends, the mechanical stress of the PTCs is minimised. In so doing, the Mylar®-­Nomex&reg...

The switch mechanism of Type F1 is comprised of five primary parts: 1) a conductive housing, 2) a steel contact cover with stationary contact, 3) a snap-action spring disc, 4) a movable contact, an...

  • Round thermal protectors
  • Flat thermal protectors
  • Pressure-resistant thermal protectors
  • Sealed thermal protectors
  • Current-independent thermal protector...

Bimetal discs are subject to an ageing process that cannot be avoided. This changes the function parameters of the discs, depending on their load capacity and life cycle. The parametric stability o...

The switchgear of type series K1 is fixed in a positive lock and is self-aligning between the floor of a conductive housing (1) and a contact cap which is made of steel (2) and insulated from it, p...

This PTC motor protector can be used in various ways, e.g. motors, transformers. It is characterized by reliability and form stability. Because of its small construction it is also usable in difficult...
Temperature limiting switches of Type M1 are used for overheating protection in electric devices. Due to a new housing, a special flat design is reached. Version UM1 – with crimp contacts – available...
Thermal Protectors of Series 01 are used for overheating protection of electrical devices, most suitable for electrical motors whereat after overheating and subsequent cooling an automatic resetting i...
Thermal Protectors of Series 01 are used for overheating protection of electrical devices, most suitable for electrical motors whereat after overheating and subsequent cooling an automatic resetting i...
The thermal switch CP1 – without insulation cap - is applied where protection against overheating is required and where an automatic reset of the device after overheating and subsequent cooling is not...
The thermal switch CW1 is used to protect transformers. It is recommended in all cases of an increase in temperature, due to an overload current, e.g. in case of short circuit and where resetting is n...

News

No news available. Please contact the company.
Address
Salzstrasse 11
99706
Sondershausen
Germany
Business Type
Manufacturer
Export Regions
Worldwide
Certificates
DIN EN ISO 9001
EN 60730-1 vom VDE-Institut
Foundation
1968
Management
Marcel P. Hofsaess

About Thermik Gerätebau GmbH

Thermik Group – founded 1968 - is the global market leader in producing thermal protectors which protect electronic windings and applications. Operating with 4 factories located on 3 continents and with more than 40 international representatives Thermik ensures a worldwide supply of thermal protectors, thermistors, PTC heating elements, KTY sensors and motor starting units. Among all producers Thermik not only has the most extensive product range but also the utmost number of customized solutions.