Catalog

Camille Bauer Metrawatt AG

Camille Bauer Metrawatt AG

  • DIN EN ISO 9001
  • DIN EN ISO 14001

Camille Bauer Metrawatt AG

  • DIN EN ISO 9001
  • DIN EN ISO 14001

About Camille Bauer Metrawatt AG

Camille Bauer has long years of experience in the development of instruments which must operate precisely in all external conditions: Our products feature maximum safety for the operating staff and standard aligned functioning under different site and ambient conditions. Highly precise EMC and environmental tests can be conducted at our own test laboratories. In addition, we have the safety and quality of our instruments again and again documented by external accredited test laboratories as well as independent international certification bodies.

Signal Conditioners (0 - 20 mA | SINEAX DCM817)

Signal isolator for electrically isolating an analog DC signal. It functions as a passive isolator without external supply power and draws its minimal energy requirements from the DC signal.

Signal Conditioners (0 - 20 mA, 4 kV | SINEAX 2I1)

Signal isolator for electrically isolating an analog DC signal. Functions as a passive isolator without external supply power and draws its minimal energy requirements from the DC signal.

  • <...

Hollow Shaft Encoders (KINAX HW730/HW730-Ex)

Programmable hollow-shaft transmitter for angular position for heavy duty applications, dia. 78 mm. Converts the angular position of a shaft into a load independent direct current signal, proportional...

Energy Meters (CAM mobile)

Demand analysis in any low-voltage system with data recording. The CAM mobile has been designed for mobile analysis in low-voltage power distributions. It provides the following functions to the user:...

Energy Meters (SINEAX CAM)

SINEAX CAM-POWER is designed for measurements in electric distribution systems or in industrial facilities. Its modular design allows it to be adjusted to individual applications and information requi...

Galvanic Isolators (SINEAX SI815)

Signal isolator for electrically isolating the 4 to 20 mA measuring/supply circuit of a measuring transducer with 2-wire connection.
The device fulfils two functions simultaneously. - It provides...

Galvanic Isolators (0 - 20 mA, 500 V | SINEAX TI816)

DC signal isolator, passive, no power supply needed. Signal isolator for electrically isolating an analog DC signal, and for converting it to a current signal or a voltage signal depending upon the ut...