Catalog

Camille Bauer Metrawatt AG

Camille Bauer Metrawatt AG

  • DIN EN ISO 9001
  • DIN EN ISO 14001

Camille Bauer Metrawatt AG

  • DIN EN ISO 9001
  • DIN EN ISO 14001

About Camille Bauer Metrawatt AG

Camille Bauer has long years of experience in the development of instruments which must operate precisely in all external conditions: Our products feature maximum safety for the operating staff and standard aligned functioning under different site and ambient conditions. Highly precise EMC and environmental tests can be conducted at our own test laboratories. In addition, we have the safety and quality of our instruments again and again documented by external accredited test laboratories as well as independent international certification bodies.

Power Meters (SINEAX A210/A220)

Measurement and display of all values of a 3-phase current system.

  • Display of all 4 quadrants
  • 63 measurands with high accuracy (U, I: 0,5%)
  • 2 pulse or trip point out...

Measurement and Monitoring System (APLUS TFT)

The APLUS is a powerful platform for measuring, monitoring and analyzing power systems. The focus is on highest Swiss quality and maximum customer benefit. This universal measurement device is availa...

Power Supplies (SINEAX B812)

The SINEAX B812 unit supplies all commercially available 2-wire field transmitters. The separation is HART penetrable, i.e. you can parameterise or read out intelligent transmitters via HART or custom...

Power Supplies (SINEAX B811)

Power pack for supplying power to 2-wire measuring transducers with DC auxiliary power, and for 1:1 transmission of the measuring signal, electrically isolated from the measurement output. Conversion...

Power Supplies (SINEAX VS70)

Power supply for the CB-Power-Bus

  • Bridging power supply through the DIN rail bus connector (CB-Power-Bus)
  • Redundant power supply
  • Built-in over-voltage (surge) prote...

Signal Converters (SINEAX VS40)

Pt100 to DC current / voltage isolator

  • Input: Pt100 (2, 3, 4 wires) (-150 °C...650 °C)
  • Output: Current 0/4...20 or 20...4/0 mA or voltage 0...5/10, 10...0, 1...5 V DC

Signal Converters (SINEAX V620)

Universal converter for mA, V, TC, RTD, Ω

  • Input: Voltage, current, RTD, TC, NTC, potentiometer, rheostat
  • Strobe: Input (control analog output)
  • Output: Current, volta...

Potentiometric Signal Converter (SINEAX TP619)

  • Input: Resistor, Rheostat, Potentiometer
  • Output: Current or voltage
  • Accuracy: 0.2%
  • 3-way galvanic isolation
  • Screw-fit terminals (removable)
  • ...

Shunt / V-I isolated converter (SINEAX VS54)

  • Input: ± 25 mV up to ± 2000 mV
  • Output: current 0/4...20, 20...4/0 mA or voltage 0...5/10, 10...0 and 1...5 V DC
  • Max. consumption 22 mA
  • 3-way galvanic isolation<...

Measurement Data and Energy Management Software (SMARTCOLLECT)

Increasing energy demand and higher energy costs together with the limited availability of natural resources requires continually more efficient handling of energy. However, it is not only ecological...

Tilt sensors (KINAX N702 CANopen | KINAX N702 SSI | KINAX N702)

Converts the tilt angle into a direct current signal, proportional to the angle. The output signal is an analog signal in form of a current change (4...20 mA). The sensor is contact free and has minim...

Tilt sensors (KINAX N702-INOX)

For robust heavy-duty applications
The KINAX N702-INOX is a very robust, absolute inclination transmitter which is ideal due to its high mechanical strength and the hermetically sealed st...