VERMAY GmbH & Co. KG

The special rubber compound that foot does not only prevent the transmission of light vibrations, caused eg by electric motors in Haushaltsgerären but also an automatic shift on smooth surfaces. The b...

The screw is the massive and very decorative foot plate connected easily rotatable and captive screw from the bottom and can be machined using a crosshead. Base plate Ø 30mm with NBR or PVC liner avai...

Through various available versions of this foot is the appropriate adjustment for most requirements. A selectable vapors inlay made ​​of nitrile rubber (NBR), about 70-75° Shore A makes the transmissi...

The design of this foot makes for easy anchoring of this foot type to the floor. An optional damper insert made of Buna-N (NBR) approx. 70° Shore A inhibits the transmission of vibrations to floors an...

The galvanized articulated spindle has a rotating connection to the galvanized foot plate providing a universal tilt of up to 7°. The optional damper insert is made of Buna-N (NBR) black, approx. 70°...

The spindle and the foot plates are available either in stainless steel or galvanized steel. The integrated damper complicates the transfer of machine vibrations and surges to ground and building, and...

The choice of material for this foot and well as its desing meet all the hygiene requirements for equipment. The finely polished foot is of a slanted shape and therefore easy to clean. The positively...

The use of this foot absorbs impacts and vibrations that may, for instance, be caused by presses or machine tools and reduces noise as well as crack formation in floors and buildings considerably. Thi...

The galvanized steel screw is connected to the foot plate of plastic pressed (PA 6) and at the bottom by means of rotatable Phillips machine screwed.

The galvanized steel screw is rotatably connected to the strong non-slip, elastmerumspritzen foot plate. The foot is screwed from the bottom by means of Phillips. The foot plate is hitzebeständigt to...

The galvanized steel screw with the galvanized base plate pivotally connected and partially screwed on the bottom using a crosshead. Through the side holes in the foot plate of the foot with the groun...

The galvanized screw with hexagon socket is pressed rotate with the galvanized foot plates. Optional floor gently slide cap PE know.