VERMAY GmbH & Co. KG

The galvanized steel screw is connected to the foot plate of plastic pressed (PA 6) and at the bottom by means of rotatable Phillips machine screwed.

The galvanized steel screw is pressed with the galvanized footplate rotatably and at the bottom by means of Phillips machine screwed. Through the side holes in the foot plate of the foot with the grou...

The connector is made ​​of plastic (PA 6), black. The nut is made of brass.

The connector is made ​​of plastic (PA 6), black. The mother is nickel-plated brass or galvanized steel.

The galvanized pin with retaining ring is pressed firmly to the foot plate of plastic (PA 6) and cap. From a minimum order of 1,000 pieces, the cap can be powder coated to customer.

The positioning plate on the underside of the sliding foot is slightly rounded (R120). Thus, a slight shifting for example from the shelf possible (without load). The galvanized steel screw is rotatab...

Due to the large angle of this walk is suitable especially for vertical alignment of large soil slopes and - bump. A selectable rubber lining protects the floor from any scratches and anti-slip. M20 t...

Due to the large angle of this walk is suitable especially for vertical alignment of large soil slopes and - bump. A selectable rubber lining protects the floor from any scratches and anti-slip.

The foot plate has a hidden fastening hole that can be pushed through, if repuired. An optinal rubber sinsert is available mach fo Buna-N ( NBR) in black, approx. 70° Shore A that inhibits the transmi...

The foot plate of PA6 has two concealed mounting holes that can, if necessary, expose by piercing. The selectable rubber mat made ​​of nitrile rubber (NBR) black, 70 ° shore A impedes the transmission...

The galvanized steel screw with the galvanized foot plates rotationally and captive.