Catalog

VERMAY GmbH & Co. KG

VERMAY GmbH & Co. KG

VERMAY GmbH & Co. KG

Back to the overview

Machine Foots (MF-h12) by VERMAY GmbH & Co. KG

Product inquiry  

The use of this foot absorbs impacts and vibrations that may, for instance, be caused by presses or machine tools and reduces noise as well as crack formation in floors and buildings considerably. This system allows height adjustment by turning the threaded spindle over the square. Thereby the base plate is lifted or lowered – depending on the direction of rotation. The fine pitch, rolled-on thread of the threaded spindles enables height adjustment for your system that is accurate to the millimetre.

Product inquiry  

More Products in the Area of Machine Foots

Machine Foots (NF-K)

Through various available versions of this foot is the appropriate adjustment for most requirements. A selectable vapors inlay made ​​of nitrile rubber (NBR), about 70-75° Shore A makes the transmissi...

Machine Foots (NFL-A)

The design of this foot makes for easy anchoring of this foot type to the floor. An optional damper insert made of Buna-N (NBR) approx. 70° Shore A inhibits the transmission of vibrations to floors an...

Machine Foots (NF)

The galvanized articulated spindle has a rotating connection to the galvanized foot plate providing a universal tilt of up to 7°. The optional damper insert is made of Buna-N (NBR) black, approx. 70°...

Machine Foots (STP)

The spindle and the foot plates are available either in stainless steel or galvanized steel. The integrated damper complicates the transfer of machine vibrations and surges to ground and building, and...

Machine Foots (NF-E)

The choice of material for this foot and well as its desing meet all the hygiene requirements for equipment. The finely polished foot is of a slanted shape and therefore easy to clean. The positively...