Barrel & Drum Pumps (type 400)

FLUX-GERÄTE GmbH

Barrel & Drum Pumps (type 400) by FLUX-GERÄTE GmbH

For pumping low viscosity fluids out of various containers

FLUX drum and container pumps are always a "double act" comprising motor and pump. Both components can vary quite flexible. For example different pumps are able to be driven with the same motor. Ideal for reliable pumping of various low-viscosity liquids - incl. especially aggressive and highly flammable ones. As a result of their low weight the pumps can be easily carried from container to container. The easy handling of motor and pump keeps changeover times short.

Pump F 424 / FP 424
Sealless in the medium area

The sealless pump F/FP 424 is ideal for transferring various low-viscosity, also aggressive media. It is suitable for media that flow quickly and neither bond, crystallize nor are abrasive. With this pump you can empty drums, IBCs and also basins. Distinct feature, only at FLUX: The specific construction with spiral-shaped guide bearing in the inner tube prevents unwanted deposits in the pump and increases the service life significantly. The pump is available in stainless steel, polypropylene or polyvinylidene fluoride. The F/FP 424 in stainless steel can also be used in hazardous areas.

Pump F 425 / FP 425
For 99,98 % drum emptying

With the F/FP 425 there is less than 0.05 l residual amount left in a 200 l drum, so maximum 0.02 %. The pump has an integrated backflow valve that is easy to close before taking the pump out of the container. Thus the backflow of the medium in the pump is prevented. This makes optimum use of especially expensive media possible and saves additional cleaning and disposal costs when handling problematic media. The pump is available in stainless steel, polypropylene and hastelloy C. In stainless steel and hastelloy C the pump F/FP 425 can also be used in hazardous areas.

Pump F 427 / FP 427
Can be taken apart completely

The pump F/FP 427 is ideal for hygienic applications and suitable for conveying media out of drums, IBCs and other containers. It can be easily and quickly disassembled for cleaning / sterilization and can be completely stripped down to individual parts. The pump has minimal dead spots. The drive shaft, the inner and the outer tube are made of stainless steel (316 Ti resp. 1.4581). The pump is also available as FOOD and 3A certified version and complies with international safety standards.


Pump F 430 / FP 430
With mechanical seal

The universal F/FP 430 pump can be used for various media and is suitable for conveying out of drums, IBCs or tanks. Due to the construction with mechanical seal, the pump can be easily and quickly taken apart into its two main components. This allows good cleanability. Distinct feature, only at FLUX: The inner tube is reinforced with a metal core on plastic models (PP and PVDF). This always allows full function of the mechanical seal. This way, leakage and unnecessary wear are prevented for the complete operating temperature range. Furthermore, it provides highest stability and makes immersion lengths of up to 3 000 mm possible. The versions in stainless steel and hastelloy C are ex-protected. The stainless steel version is also available as FOOD certified version.

Pump F 430 PP-100/50
Special container pump for higher delivery heads

Pump F 430 PP 100/50 in polypropylene was designed for higher delivery pressure. Instead of a rotor, it is equipped with an impeller in a pump housing. In connection with the powerful FLUX motors the pump delivers a far higher pressure of over 3 bar compared to pumps with semi-axial rotors. This makes it especially convenient for conveying media out of e.g. IBCs and other containers into higher lying pipe systems or out of an IBC in the basement to a higher floor.

Pump F 430 TR
For dry installation / horizontal use

Horizontal pump F 430 TR is ideal for conveying media from IBCs, tanks and other containers with low level outlet. E.g. if a tank is not accessible from the top, or if the spatial conditions do not allow use of a vertical pump. For cleaning, the pump can be easily and quickly taken apart in its two main components. The pump is available in stainless steel or polypropylene. The stainless steel version can also be used in hazardous areas.

More Products in the Area of Barrel & Drum Pumps

FLUX drum and container pumps are suitable for pumping various low-viscosity and also especially aggressive and highly-flammable fluids. The axial-impeller pumps provide a pulsation-free pumping ac...

The small drum pumps JUNIORFLUX and COMBIFLUX are particularly suitable for filling comparatively small quantities from containers such as cans up to 200 litre drums. The small diameter of the oute...

For pumping highly viscous media from drums with lids

VISCOFLUX drum emptying systems were specially developed for emptying lidded drums with high-viscosity contents. The m...

For transferring higher-viscosity materials that are just capable of flowing

The drum emptying system VISCOFLUX lite is used to transfer higher-viscosity media which are ju...

For transferring higher-viscosity materials that are just capable of flowing in the Ex-Area

In the Ex version it is suitable for the use in hazardous areas of zone 1 and fo...

Address
Talweg 12
75433
Maulbronn
Germany
Business Type
Manufacturer
Export Regions
Worldwide
Certificates
DIN EN ISO 9001:2008
Foundation
1949
Management
Klaus Hahn
Herbert Hahn
Employees
150

About FLUX-GERÄTE GmbH

In 1950, the world's first electric barrel pump was named FLUX. In the meantime the undisputed pioneer in the area of barrel pump technology possesses outstanding knowhow and experience in many other areas of pump technology. The wide product range now extends from the most different types of pumps with motors, flow meters and accessories through special system solutions such as the drum emptying systems to custom-designed systems for plant engineering. The internationally operating family company with its 7 subsidiaries and numerous representatives supplies its products to more than 100 countries worldwide.