FLUX-GERÄTE GmbH
- Manufacturer
- Germany
- Website
- Send product inquiry
- Phone
FLUX-GERÄTE GmbH
- Manufacturer
- Germany
- Website
- Send product inquiry
- Phone
- ISO 9001:2015
Drum pump for 99.98% drum emptying (F 425 / FP 425) by FLUX-GERÄTE GmbH
With the Drum pump F/FP 425 there is less than 0.05 l residual amount left in a 200 l drum, so maximum 0.02 %. The pump has an integrated backflow valve that is easy to close before taking the pump out of the container. Thus the backflow of the medium in the pump is prevented. This makes optimum use of especially expensive media possible and saves additional cleaning and disposal costs when handling problematic media. The pump is available in stainless steel, polypropylene and hastelloy C. In stainless steel and hastelloy C the pump F/FP 425 can also be used in hazardous areas.
Technical data:
- Flow rate: max. 120 l/min1
- Delivery head: max. 26 mwc2
- Viscosity: min. 1 mPas - max. 1200 mPas2
- Outer tube diameter: min. 41 mm3 - max. 50 mm3
- Immersion length: 700, 1000, 1200
- Materials outer tube:
- Media / Fluids:
- Seal: with mechanical seal
- Container:
- 1 The maximum delivery rate is a test bench value, measured with water at 20 ° C at the pressure port of the pump, without accessories (hose, nozzle, flow meter). The practically achievable delivery rate is lower. It depends on the individual application, the fluid properties and the pump configuration. Please refer to technical data sheets / performance diagrams.
- 2 dependent on pump model, motor and medium
- 3 dependent on pump model
Product attributes
- With backflow stop
- Two adjusting levers to easily close the backflow stop
- With mechanical seal for seal of inner tube
- Metal core in the inner tube at the PP version
- Versions for use in hazardous areas available
- Grease-lubricated shaft bearing
- Can be combined with various motors as required
Benefits
- Optimal residual emptying with e.g. less than 0.05 l residual amount left in 200 l drum
- No tilting to totally empty the drum
- Reduction of cleaning and waste disposal costs
- No loss of medium when taking the pump from drum to drum
- Optimal use of fluids
- Unique, only at FLUX: the inner tube reinforced by a metal core at the PP version. It prevents leakage and unnecessary wear of the mechanical seal in all operating temperature ranges.
- Can be temporarily operated against closed valve (hand nozzle, valves etc.) until the indicated temperature of the materials is reached
- Stainless steel and hastelloy C version can be used in hazardous areas
More Products in the Area of Drum pumps
Pump stands for drum pumps and progressive cavity pumps
The FLUX pump stands are designed for use with VISCOPOWER progressive cavity pumps and all standard drum pumps (Ø 25-54 mm). They enable ergonomic, safe and flexible handlin...
Pump kits for Food and Pharma up to 80.000 mPas (VISCOPOWER F 570)
The FLUX progressive cavity pump VISCOPOWER F 570 - Industry with planetary gear is suitable to pump thin to medium viscous media.