Barrel and drum pumps Manufacturers online

Barrel and drum pumps are technical devices used for filling and transferring liquids from drums, canisters, containers or IBCs.

They are used wherever large or unwieldy liquid containers need to be emptied or transferred in a safe, clean and controlled manner.

Below you will find the mode of operation, the components of barrel and drum pumps, their typical areas of application and safety aspects that should be considered when using them:

How barrel and drum pumps work:

The pump is inserted into the drum or container from above and conveys the liquid to the outside via a riser pipe. The pumping technology differs depending on the design:

1. Electrically operated drum pumps:
   For higher delivery rates and continuous operation.
   Usually available with 230 V or 24 V motors.
2. Positive displacement pumps (e.g. progressive cavity pumps):
   The liquid is displaced by a rotating screw.
   Particularly suitable for viscous, highly viscous or shear-sensitive media such as oils, honey, paints and creams.
   Very even, low-pulsation flow.
3. Centrifugal pumps:
   An impeller generates centrifugal force, which pushes the liquid outwards and thus transports it.
   More suitable for low-viscosity media such as water, alcohol and low-viscosity chemicals.
   High flow rate with low viscosity.
4. Piston pumps (manual):
   With hand lever or foot operation, particularly suitable for small delivery rates.
   Practical for oils, fuels or cleaning agents in mobile applications.
5. Pneumatic drum pumps:
   Operate with compressed air instead of electricity
   Particularly safe in potentially explosive atmospheres (ATEX).

Components of barrel and drum pumps:

A typical barrel and drum pumps consists of the following parts:

1. Pump tube / immersion tube: Is inserted into the container (usually 100-120 cm long).
2. Drive unit or motor: Manual, electric or pneumatic.
3. Delivery line: Hose or pipe for targeted delivery of the pumped liquid.
4. Seals and materials: Adapted to the medium, e.g. PTFE, EPDM, FPM.
5. Carrying handle or mounting adapter: For ergonomic handling or fixed installation.
6. Professional versions also have integrated flow meters, shut-off valves or protective mechanisms.

Typical areas of application for barrel and drum pumps:

Barrel and drum pumps are versatile and indispensable in many industries:

1. Industry and chemicals:
Filling and transferring solvents, acids, alkalis, oils and cleaning agents.
Safe working with hazardous substances, often with chemical-resistant material.

2. Workshops and vehicle technology:
Removal of lubricants, hydraulic oil, engine oil, antifreeze and fuels.
Clean dosing and avoidance of waste

3. Agriculture and horticulture:
Transferring pesticides, liquid fertilizers, diesel or liquid manure additives.
Use of mobile pumps on vehicles or on the farm.

4. Food and cosmetics industry:
Pumping out liquid or viscous foodstuffs such as sauces, oils, honey, lotions and creams.
Hygienic design made of stainless steel or food-safe plastic.

5. Water and waste water technology:
Dosing and transfer of chlorine, flocculants and pH regulators.
Part of automated processes or emergency solutions.

Safety aspects when using barrel and drum pumps:

Particular care must be taken with chemical, flammable or toxic liquids:

• Check material compatibility, e.g. with aggressive chemicals.
• Ensure tightness and overflow protection.
• Use ATEX-compliant design in potentially explosive zones.
• Wear personal protective equipment (PPE), e.g. gloves and safety goggles.
• Use non-return valves or stopcocks.
• Drum pumps should be cleaned and maintained regularly to ensure proper function and safety.

Barrel and drum pumps are indispensable tools for the safe, clean and efficient handling of liquids in all types of containers. Their function is based on various pumping principles - depending on the medium, viscosity, operating environment and flow rate. Whether in industry, trade or agriculture, the right drum pump saves time, prevents waste and protects users. Professional use always relies on high-quality, media-resistant and safety-tested systems.

Here you will find an overview of the most important criteria to look out for when buying barrel and drum pumps:

Buying barrel and drum pumps is more than just a question of price. The selection must be precisely tailored to the area of application, the pumped medium and the operational requirements.

• The most important point is to know exactly which liquid is to be pumped. Depending on the medium, different materials and pump types are required:
• Water-based liquids do not require any special material resistance.
• oils, fuels and lubricants require viscous pumps with oil-resistant seals.
• Acids, alkalis and solvents require chemical-resistant plastics such as PVDF, PTFE or stainless steel.
• Food or cosmetics require food-safe materials, e.g. AISI 316L stainless steel and, if necessary, hygienic design.
• The wrong choice of material can lead to leaks, corrosion or pump failure.
• Not every pump is suitable for every liquid. The viscosity (flowability) of the medium influences the choice of pump technology:
• For low-viscosity media, e.g. water, alcohol, centrifugal pumps are usually sufficient.
• Progressive cavity, piston or gear pumps are suitable for medium to highly viscous liquids such as oils, honey, paints and glycerine.
• For shear-sensitive media such as emulsions or creams, a particularly gentle pumping method is required.
• A powerful motor and a suitable hose cross-section are also important for viscous media.
• The drive type should be matched to the operating conditions and required delivery rate:
• Manual pumps are inexpensive, robust and ideal for small quantities or mobile applications.
• Electric pumps offer convenient operation, constant flow rate and are suitable for frequent use.
• Pneumatic pumps (powered by compressed air) are particularly safe in potentially explosive atmospheres (ATEX) and do not require electricity but do require compressed air.
• Depending on the place of use, e.g. without a power supply, a specific type of drive may be necessary.
• Drum pumps must be suitable for the size and shape of the containers in which they are used:
• Standard drums (200 l) usually have a G2" threaded lid, for which most pumps are designed.
• Smaller containers or IBC containers require specific immersion tube lengths or adapters.
• The immersion depth of the pipe should correspond to the fill level of the container in order to empty as completely as possible.
• The amount of liquid required per unit of time determines the performance of the pump:
• A low flow rate is sufficient for occasional transfer of small quantities.
• For regular filling, continuous operation or automated processes, a pump with a high flow rate and, if necessary, an adjustable flow rate should be selected.
• For applications with pressure requirements, e.g. filling pipes or tanks, the maximum pressure specification is also crucial.
• Professional drum pumps must be made of media-resistant, durable and robust materials:
• Stainless steel, e.g. AISI 316 for aggressive or food-safe media.
• PVDF, PP or PTFE for chemical substances.
• Aluminium or galvanized steel for fuels (not for aggressive acids).
• EPDM, Viton, NBR for suitable seals depending on the medium.
• A compatibility table from the manufacturer helps you to select the right material for the pump, seals and hoses.
• Especially in daily use, it is important that the pump is easy to operate, e.g. ergonomic handle, quick-release couplings and, if necessary, equipped with a carrying device, drum lid holder or retaining clamps.
• A well thought-out design makes work easier and prevents unnecessary downtime.
• The pump must meet certain standards, especially for hazardous substances:
• ATEX certification for potentially explosive liquids (e.g. solvents, gasoline).
• Possibility of earthing to prevent electrostatic charging.
• Certificates such as CE, FDA, 1935/2004 for food or pharmaceutical use.
• The pump should be easy to clean and maintain (e.g. can be dismantled).
• Wear parts such as seals, rotors or hoses should be easy to replace and, above all, reorder.
• A good range of spare parts ensures sustainability and operational reliability.
• For long-term use, a model with a service partner or manufacturer support is recommended.
• Cheap solutions are rarely worthwhile for intensive use or safety-critical media
• A good provider not only offers products, but also advice, support, proof of conformity and a guarantee.
• In the long term, quality pays off in the form of fewer breakdowns, greater safety and lower follow-up costs.

The purchase of barrel and drum pumps requires a precise analysis of the operating conditions. The right choice depends on the medium, container size, viscosity, safety requirements and daily workflow. Those who pay attention to high-quality materials, suitable pumping technology, reliable drives and certified safety will receive a durable and efficient solution that fully meets operational requirements.

Barrel and drum pumps can be purchased from various suppliers. Comprehensive information about manufacturers and suppliers of Barrel and drum pumps from all over the world can be found on Exportpages.