MTM Power® Messtechnik Mellenbach GmbH
MTM Power® Messtechnik Mellenbach GmbH
DC/DC converters for floor conveyor technology (PCMDNI300) by MTM Power® Messtechnik Mellenbach GmbH
With the PCMDNI300 series, MTM Power presents a generation of DC/DC converters without galvanic isolation as a decentralized power supply in vehicle applications. The wide input voltage range of 28...160 VDC allows the converters to be used on 36 V to 110 V batteries.
The outstanding efficiency of up to 95 % enables the devices to be operated in a temperature range of -40 to +70 °C without derating. The fully vacuum encapsulated (U.S. Patent No. 8,821,778 B2) converter offers protection against condensation, conductive dusts and other environmental influences and is available with output voltages of 12 VDC or 24 VDC. Thanks to the robust design with contact cooling (BPC technology), the heat loss is dissipated via the mounting plate and the service life expectancy of the devices is increased. A self-cooling version with integrated heat sink is available as an option. A primary remote control input allows the output voltage to be switched on with low power at high loads.
An active inrush current limiter with reverse polarity protection is installed in the converter's input circuit to allow the use of standard miniature circuit breakers corresponding to the rated power of the PCMDNI300 and to prevent contact damage to upstream switching devices. The connection is made via industrial plug connectors with either spring-loaded or screw terminals.
Technical data
Output power
300 W
Input voltages
48 / 60 / 72 / 80 / 96 / 110 VDC
DC output voltages
12 V, 24 V
Housing material, potting compound
UL94-V0 / vacuum potted
Ambient temperature
-40...+70 °C / +85 °C t £10 min
Special features
Without galvanic isolation
Base Plate Cooling (BPC) technology
High efficiency up to 95 %
Continuous short-circuit proof
Transient-protected
Tested in accordance with EN 50 155 / 50 121-3-2 / 61 373 Cat. 1, Cl. B
Tested in accordance with EN 61 010-1 / 61 000-6-4 / 61 000-6-2
Fire protection according to EN 45 545-2
Long service life
More Products in the Area of DC-DC Converters
DC/DC Converters for Industrial Applications and Vehicles (PCMD / PCMDS)
Whenever the available system voltage is not suitable for supplying the existing electrical or electronic components, voltage converters must be used. Electrical converters that are capable of conv...
DC-DC Converters (PMDS30 24S05 U-VT)
The compact DC/DC converters in the PMDS/PCMDS30 series are suitable for PCB and chassis mounting. They are designed in current-fed push-pull technology. The advantages of this circuit concept are...
DC-DC Converters (PCMGS14 110S24)
The DC/DC converter with 14 W is designed in accordance with EN 50 155 for applications in railroad and transportation technology with low power requirements.
Special features