OKS Spezialschmierstoffe GmbH

• Rolling and friction bearing lubrication, even at high temperatures
• Lubrication for bearings with contact to cleaning agents or disinfectants
• For mechanical units such as levers, joints and hinges, also under strong water effect

• NSF H1 registered
• High shear stability prevents thinning out of the grease under extreme mechanical loads such as during vibrations
• Excellent wear protection and very good high-pressure properties
• The calcium sulphonate complex soap ensures excellent water resistance and very good corrosion protection
• Broad temperature application range (-30°C to +160°C)
• High temperature and oxidation stability through fully synthetic base oil
• Very high resistance to water-alkaline or acidic disinfectants and cleaning agents
• Also available as spray version OKS 481
• MOSH/MOAH-free (as per recipe)

• lower operating temperature: -30 °C
• upper operating temperature: 160 °C
• consistency: 2 NLGI grade (DIN ISO 2137)
• viscosity (at 40°C): 100 mm²/s (base oil)
• four-ball test rig welding load: 4,000 N

Clean the lubricating points well for optimal effect. Before filling for first time, remove anti-corrosion agent. Fill the bearing such that all functional surfaces are certain of being greased. Fill normal bearings up to about 1/3 of the free space inside the bearing. Low-speed bearings (DN value below 50,000) and their housings should be filled completely. The bearing and machine manufacturer's instructions should be observed. Subsequent lubrication at the lubrication nipples by grease gun or by automatic lubrication system. Assess the lubrication frequency and quantity on the basis of the service conditions. If old grease cannot be removed, restrict the quantity of grease so as to avoid over-lubricating the bearing. If lubrication frequencies tend to be low, you should aim for a full grease change. Only mix with suitable lubricants.

No matter what industry you come from, we at OKS have the right solution for you.

• Catering equipment and food processing technology
• Chemical industry
• Municipal services
• Shipbuilding and marine technology
• Plant and machine (tool) engineering
• Logistics
• Paper and packaging industry
• Rail vehicle technology
• Iron and steel industry
• Rubber and plastic processing
• Glass and foundry industry