Catalog

OKS Spezialschmierstoffe GmbH

OKS Spezialschmierstoffe GmbH

  • ISO 9001:2015
  • ISO 14001:2015
  • ISO 45001:2018

OKS Spezialschmierstoffe GmbH

  • ISO 9001:2015
  • ISO 14001:2015
  • ISO 45001:2018

Back to the overview

Special grease for exposure to seawater (OKS 403) by OKS Spezialschmierstoffe GmbH

Product inquiry  

Marine Grease

OKS 403 is a marine grease for lubrication of machine elements subjected to water or sea water.

Areas of application

  • Lubrication of open toothing, friction and rolling bearings, threaded spindles, hinges, guides on windlasses, ship´s cranes, underwater devices, offshore components or in wet areas of the textile industry
  • Corrosion protection of moving parts subject to seawater in coastal and marine areas or constant influence of water
Advantages and benefits
  • Excellently suited as a waterproof special grease above and under water
  • Highly effective due to optimum wear and outstanding corrosion protection
  • Economical due to combined protective effect
Technical specifications
  • lower operating temperature: -25 °C (≤ 1,400 hPa)
  • upper operating temperature: 80 °C (F50 (A/1500/600), 100h)
  • consistency: 1-2 NLGI grade (DIN ISO 2137)
  • viscosity at (40°C): 100 mm²/s (base oil)
  • four-ball test rig welding load: 3,000 N
Applications
For best results clean the lubricating point carefully. Clean with solvents like OKS 2610/OKS 2611 Universal Cleaner. Remove the corrosion protection ahead of the initial filling. Fill the bearings in a way that all the functional surfaces for sure get the grease. Slow moving bearings(DN-value < 50,000) should be filled completely, normal moving bearings should be filled to 1/3 of the free inner housing space. Observe the instructions of the bearing or machine manufacturer. Relubrication with a grease gun on to the grease nipples or with an automatic lubrication system. Relubrication intervals and amount to be defined acc. to the service conditions. If the removal of the old grease is not possible the amount of grease has to be limited to avoid excess lubrication of the bearing. At longer relubrication intervals a complete exchange of the old grease is recommended. Only mix with appropriate lubricants.

Industries
No matter what industry you come from, we at OKS have the right solution for you.

  • Iron and steel industry
  • Logistics
  • Rail vehicle technology
  • Municipal services
  • Shipbuilding and marine technology
  • Rubber and plastic processing
  • Paper and packaging industry
  • Chemical industry
  • Plant and machine (tool) engineering
  • Glass and foundry industry

Product inquiry  

More Products in the Area of Industrial greases

MoS2 High-Pressure Long-Life Grease (OKS 410)

MoS₂ High-Pressure Long-Life Grease

OKS 410 is a high-pressure long-life grease for lubrication points subjected to pressure or impacts also under outdoor exposure.

Low-Temperature and High-Speed Grease (OKS 416)

Low-Temperature and High-Speed Grease

OKS 416 is a low temperature and high speed grease.

Areas of application

  • For lubrication po...

Universal Grease for Long-Life Lubrication (OKS 422)

Universal Grease for Long-Life Lubrication

Fully synthetic high-performance grease for long-term lubrication of machine elements at high temperatures, speeds and loads.

Fluid Grease for Gears, synthetic (OKS 428)

Fluid Grease for Gears, synthetic

OKS 428 is a synthetic fluid grease for gears.

Areas of application

  • Lubrication of heavy loaded...

Low-Temperature Grease for Food Processing Technology (OKS 472)

Low-Temperature Grease for Food Processing Technology

White fully synthetic low-temperature grease with NSF H1 certification for food processing technology.