Catalog

OKS Spezialschmierstoffe GmbH

OKS Spezialschmierstoffe GmbH

  • ISO 9001:2015
  • ISO 14001:2015
  • ISO 45001:2018

OKS Spezialschmierstoffe GmbH

  • ISO 9001:2015
  • ISO 14001:2015
  • ISO 45001:2018

Back to the overview

Universal Grease for Long-Life Lubrication (OKS 422) by OKS Spezialschmierstoffe GmbH

Product inquiry  

Universal Grease for Long-Life Lubrication

Fully synthetic high-performance grease for long-term lubrication of machine elements at high temperatures, speeds and loads.

Areas of application

  • Lubrication of roller and plain bearings as well as of threaded spindles, gearwheels, worms and similar components
  • Lubrication of spindle bearings in machine tools
Advantages and benefits
  • Allows high machine service lives due to low-wear operation and low lubrication frequencies
  • Outstanding resistance in a wide temperature range, at high stresses and surface slide speeds as well as at vibrations
  • Resistant to cold and hot water
  • Excellent wear protection
Technical specifications
  • lower operating temperature: -40 °C (≤ 1,400 hPa)
  • upper operating temperature: 140 °C (F50 (A/1500/6000), 100h)
  • consistency: 2 NLGI grade (DIN ISO 2137)
  • viscosity at (40°C): 50 mm²/s (base oil)
  • four-ball test rig welding load: 3,400 N
Applications
For highest effectiveness carefully clean the lubrication point, for example with OKS 2610/OKS 2611 universal cleaner. Before filling a bearing for first time, remove anti-corrosion agent. Fill the bearing such that all functional surfaces are certain of being greased. Fill normal bearings up to about 1/3 of the free space inside the bearing, high-speed bearings (DN value above 400,000) up to about 1/4. Low-speed bearings (DN value below 50,000) and their housings should be filled completely. In as far as available, the bearing and machine manufacturer's instructions should be observed. Subsequent lubrication at the lubrication nipples by grease gun or by automatic lubrication system. Assess the lubrication frequency and quantity on basis of service conditions. If old grease cannot be removed, restrict the quantity of grease so as to avoid overlubricating the bearing. If lubrication frequencies tend to be low, you should aim for a full grease change. Caution: Only mix with suitable lubricants.

Industries
No matter what industry you come from, we at OKS have the right solution for you.
  • Rubber and plastic processing
  • Shipbuilding and marine technology
  • Logistics
  • Chemical industry
  • Glass and foundry industry
  • Paper and packaging industry
  • Rail vehicle technology
  • Plant and machine (tool) engineering
  • Municipal services
  • Iron and steel industry

Product inquiry  

More Products in the Area of Industrial greases

Special grease for exposure to seawater (OKS 403)

Marine Grease

OKS 403 is a marine grease for lubrication of machine elements subjected to water or sea water.

Areas of application

MoS2 High-Pressure Long-Life Grease (OKS 410)

MoS₂ High-Pressure Long-Life Grease

OKS 410 is a high-pressure long-life grease for lubrication points subjected to pressure or impacts also under outdoor exposure.

Low-Temperature and High-Speed Grease (OKS 416)

Low-Temperature and High-Speed Grease

OKS 416 is a low temperature and high speed grease.

Areas of application

  • For lubrication po...

Fluid Grease for Gears, synthetic (OKS 428)

Fluid Grease for Gears, synthetic

OKS 428 is a synthetic fluid grease for gears.

Areas of application

  • Lubrication of heavy loaded...

Low-Temperature Grease for Food Processing Technology (OKS 472)

Low-Temperature Grease for Food Processing Technology

White fully synthetic low-temperature grease with NSF H1 certification for food processing technology.