OKS Spezialschmierstoffe GmbH

Manufacturer
Germany
Website
Product inquiry
Phone

ISO 9001:2015
ISO 14001:2015
ISO 45001:2018

Manufacturer
Germany
Website
Product inquiry
Phone

ISO 9001:2015
ISO 14001:2015
ISO 45001:2018

High-Performance Grease (OKS 475) by OKS Spezialschmierstoffe GmbH

High-Performance Grease

Fully synthetic high-performance grease with PTFE for use at low temperatures and high speeds.

Areas of application

Grease lubrication of plain and roller bearings with low bearing play as well as bearings with low coasting moments
Lubrication for fast-running roller bearings
Sealing lubrication of mating surfaces, for example ground-in parts such as taper plugs, dosing plungers and valves
Maintenance lubrication of plastic and rubber parts with embrittlement protection and good frictional characteristics, particularly on metal surfaces

Advantages and benefits

Temperature range from -60°C to 120°C
Resistant to all alkali and acid cleaning agents and disinfectants
Good wear protection through PTFE
NSF H2 registration

Technical specifications

lower operating temperature: -60 °C (≤ 1,400 hPa)
upper operating temperature: 120 °C (F50 (A/1500/6000), 100h)
consistency: 2 NLGI grade (DIN ISO 2137)
viscosity at (40°C): approx. 30 mm²/s (base oil)
four-ball test rig welding load: 2,000 N

Applications
Clean the lubricating points well for optimal effect. Before filling for first time, remove anti-corrosion agent. Fill the bearing such that all functional surfaces are certain of being greased. Fill normal bearings up to about 1/3 of the free space inside the bearing, high-speed bearings (DN value < 400,000) up to about 1/4. Low-speed bearings (DN value > 50,000) and their housings should be filled completely. In as far as available, the bearing and machine manufacturer's instructions should be observed. Subsequent lubrication at the lubrication nipples by grease gun or by automatic lubrication system. Assess the lubrication frequency and quantity on the basis of the service conditions. If old grease cannot be removed, restrict the quantity of grease so as to avoid over-lubricating the bearing. If lubrication frequencies tend to be low, you should aim for a full grease change. Caution: Only mix with suitable lubricants.

Industries
No matter what industry you come from, we at OKS have the right solution for you.Shipbuilding and marine technology