OKS Spezialschmierstoffe GmbH

Manufacturer
Germany
Website
Product inquiry
Phone

ISO 9001:2015
ISO 14001:2015
ISO 45001:2018

Manufacturer
Germany
Website
Product inquiry
Phone

ISO 9001:2015
ISO 14001:2015
ISO 45001:2018

Low-Temperature and High-Speed Grease (OKS 416) by OKS Spezialschmierstoffe GmbH

Low-Temperature and High-Speed Grease

OKS 416 is a low temperature and high speed grease.

Areas of application

For lubrication points of all kinds as slide ways, spindles, geared parts of the electronic, precision engineering and optical equipment, temporarily or permanently exposed to extreme low temperatures like in arctic climates or cold storages
Roller bearing lubrication of high-speed bearings, e.g. spindle bearings, miniature or precision bearings in machine-tools or textile machines, measuring equipment, electric motors of control technology and precision mechanics

Advantages and benefits

Dynamic light noise proofed long-term lubrication grease
Best use at arctic conditions and very high speed
High efficiency through optimal formulation
Multifunctional application beside the regular range of performance for greases
Efficient through economical application
No nameable change of consistency at low temperatures or high speeds and accordingly temperatures
Oxidation stable and resistant against cold and hot water

Technical specifications

lower operating temperature: -50 °C (≤ 1,400 hPa)
upper operating temperature: 120 °C (F50 (A/1500/6000), 100h)
consistency: 2 NLGI grade (DIN ISO 2137)
viscosity at (40°C): 15 mm²/s (base oil)
four-ball test rig welding load: 2,400 N

Applications
For best results clean the lubrication point with OKS 2610/OKS 2611 Universal Cleaner. Remove the corrosion protection media before initial filling. Fill the bearings in a way that all the functional surfaces are lubricated sufficiently. Slow moving bearings (DN-value < 50,000) should be filled completely. Fast running bearings (DN-value >400,000) should be filled to 1/4, normal moving bearings to 1/3 of the free inner housing space. Observe the instructions of the bearing or machine manufacturer. Relubrication with a grease gun on to the grease nipples or with an automatic lubrication system. Relubrication intervals and amount to be defined acc. to the service conditions. If the removal of the old grease is not possible the amount of grease has to be limited to avoid excess lubrication of the bearing. For longer relubrication intervals, a complete exchange of the old grease is recommended. Mix with appropriate lubricants only.

Industries
No matter what industry you come from, we at OKS have the right solution for you.