OKS Spezialschmierstoffe GmbH

• Highly adhesive lubrication of moving parts, e.g. valve spindles, piston rods, wire cables, drag cables, drive and conveyor chains, hinges and guides, at highly corrosive conditions in food processing technology
• Temporary corrosion protection of ferrous and non-ferrous metals, in particular in highly corrosive atmospheres, such as industrial atmospheres, outdoor weathering under roofs of semi-finished products and finished products
• Shipping protection of packed and unpacked machines and machine parts, apparatuses and equipment goods under extreme climatic conditions

• Highly adhesive oil with very good creep and lubrication properties
• Optimal corrosion protection through high effectiveness of the corrosion protection additive
• After the solvent has dried, forms a transparent, highly adhesive oil film
• Contains non-ferrous metal deactivator
• NSF H1-registered

• lower operating temperature: -40 °C
• upper operating temperature: 80 °C
• density (at 20°C): 0.64 g/cm³
• viscosity (at 40°C): 1,700 mm²/s / >21.5 mm²/s (base oil / with solvent)
• salt spray test: > 100 h / > 300 h (brush application / spray application (max.))
• UFI: FGM1-X0HW-X00T-0QAF

For best adhesion, clean the surfaces. Best way is to clean mechanically first and then with OKS 2610/OKS 2611 universal cleaner. Apply a sufficient quantity of OKS 3600/OKS 3601 to the areas to be protected. Apply several times depending on the operating conditions and storage duration. Let soak in/dry before packing. Observe the machine manufacturer's instructions. Only mix with suitable lubricants.

No matter what industry you come from, we at OKS have the right solution for you.

• Catering equipment and food processing technology
• Iron and steel industry
• Logistics
• Municipal services
• Shipbuilding and marine technology
• Paper and packaging industry
• Chemical industry
• Rubber and plastic processing
• Glass and foundry industry
• Plant and machine (tool) engineering
• Rail vehicle technology