OKS Spezialschmierstoffe GmbH

• For lubricating machine elements under high loads (also under water influence)
• Lubrication of chains, joints and guides
• Lubrication of rolling and friction bearings
• Lubrication of toothed gearings, fittings, hinges and locks

• NSF H1 registered
• The optimal additives allow good resistance to oxidation and ageing for long operating and durability
• Resistant to cold and hot water, steam and alkaline and acidic disinfectants and cleaning agents
• Also available as spray version OKS 3751
• MOSH/MOAH-free (as per recipe)

• lower operating temperature: -35 °C
• upper operating temperature: 180 °C
• density (at 20°C): 0.86 g/cm³
• viscosity (at 40°C): 100 mm²/s
• four-ball test rig welding load: 3,000 N

Clean the lubricating point for optimal effect. Apply a sufficient amount of OKS 3750 with a brush, drip oiler, by immersion or using a suitable automatic lubrication system. In as far as available, observe the machine manufacturer's instructions. Assess the lubrication frequency and quantity on the basis of the service conditions. Caution: Only mix with suitable lubricants.

No matter what industry you come from, we at OKS have the right solution for you.

• Catering equipment and food processing technology
• Paper and packaging industry
• Municipal services
• Rubber and plastic processing
• Plant and machine (tool) engineering
• Shipbuilding and marine technology
• Glass and foundry industry
• Logistics
• Rail vehicle technology
• Chemical industry