OKS Spezialschmierstoffe GmbH

• Lubrication of chains, hinges, joints, ejector pins, clamping and drying frames or slideways at temperatures up to 250°C or under influence of water, for example conveying systems in painting, stoving, drying and cooling bed installations

• Outstanding oxidation properties
• Resistant to water and steam
• Good creep properties
• Outstanding adhesion and lubrication effect with no tendency to drip
• No formation of hard residues
• Extreme wear protection through Moₓ-Active
• Resistant to ultraviolet radiation

• lower operating temperature: -10 °C
• upper operating temperature: 250 °C
• density (at 20°C): 0.68 g/cm³
• viscosity (at 40°C): 4,000 mm²/s
• four-ball test rig welding load: 2,200 N
• UFI: T9M1-X054-A00U-P15A

For optimum effect, clean the surfaces. Best way is to clean mechanically first and then with OKS 2610/OKS 2611 universal cleaner. Stir/shake well before use. Apply OKS 354 with a brush, drip oiler or by immersion or using a suitable automatic lubrication system to locations to be lubricated. Spray OKS 3541 on evenly. Allow excess to drip off and wait for lubricant to penetrate before resuming operation. Observe the machine manufacturer's instructions. Assess the lubrication frequency and quantity on basis of service conditions, avoid excessive lubrication. Only mix with suitable lubricants.

No matter what industry you come from, we at OKS have the right solution for you.

• Chemical industry
• Iron and steel industry
• Rubber and plastic processing
• Rail vehicle technology
• Glass and foundry industry
• Municipal services
• Plant and machine (tool) engineering
• Paper and packaging industry
• Shipbuilding and marine technology
• Logistics