Inductive Sensor LVDT LVIG

The LVDT inductive sensor LVIG by WayCon is 20 mm in diameter and is made from nickel-plated steel.

The rugged design and guided transducer bar allow for measuring ranges up to 200 mm without a problem. The articulated head mounts help with assembly and prevent transverse loads on the transducer bar. The LVDT LVIG has a standard IP65 rating and is available with versions up to IP68 for severe conditions. The LVDT LVIG is available with internal electronics (0…10 V / 4…20 mA) or external electronics, which comes with a top hat rail housing. Inductive sensors have an extremely high repeatability and good linearity up to 0.25 % of the measuring range. The touchless measuring principle ensures negligible LVDT wear for lasting linear measurement with absolute position data. The sensor is largely resistant to external interferences.
The LVDT features a primary and two secondary coils. The linear movement of the transducer bar generates an electric signal. Mounted to the transducer bar is the ferromagnetic core. The core induces a voltage in the secondary coils. The electronics/measuring amplifier converts the induced voltage into a standard output signal.

Thanks to this tried and tested principle, the LVDT can be used virtually anywhere, from automation to process assurance or even quality assurance in industrial plants.

WayCon uses company developments and production to implements custom solutions.

More News

14.02.2022 02:10

Inductive sensor LVDT LV-G - self-orienting rod end bearings for perfect adjustment

The tried-and-tested LVDT series LV by WayCon is being expanded with the LV-G, which is equipped with rod end bearings. Thanks to the rod end bearings, the inductive sensors can be directly attached to the object to be measured. Here, the self-orienting rod end bearings facilitate the absorption of transverse force. Attachment via rod end bearings is ideal for installation at the end of a piston rod or the base of a hydraulic cylinder. Regular relubrication of the rod end bearings by the customer can also prolong the life and increase process safety.

10.12.2021 02:10

Analog Signal Conditioner IMX – a device that’s three in one

With the IMX, WayCon Positionsmesstechnik offers a device that quickly converts input signals (position, frequency, SSI and speed) into absolute analog values. The analog variables of current and voltage can be scaled from 0/4 ... 20 mA and -10...+10 V respectively as desired.

09.07.2021 01:05

Laser Displacement Sensor LAS2-TM - Powerful sensors in a compact design

Laser distance sensors of the LAS2-TM series impress with their high precision and their miniature housing.

26.04.2021 02:10

Eddy current sensors EZ1000 - non-contact measurements for ATEX areas

Eddy current sensors of the EZ1000 series are designed for measurements under the toughest conditions and can be used in areas with explosion hazards. Thanks to the eddy current measuring principle, the measurement is contactless and is not affected by environmental influences such as water, dust or oil.

27.03.2021 01:05

Have you met TEDS?

TEDS (Transducer Electronic Data Sheet) plugs store sensor data like a conventional data sheet. Connected to a measuring amplifier, all required information about the sensor can be read out quickly, easily, and directly.

12.02.2021 06:30

Inductive sensors LVDT series LVISM - Hardly larger than a match

With a housing diameter of only 4 mm, the LVISM is one of the smallest LVDT sensors of its kind. Furthermore, with a length of 7 cm it is not even twice as long as a match.