Catalog

WayCon Positionsmesstechnik GmbH

WayCon Positionsmesstechnik GmbH

  • ISO 9001:2015
  • REACH

WayCon Positionsmesstechnik GmbH

  • ISO 9001:2015
  • REACH

12.02.2021 06:02

Inductive sensors LVDT series LVISM - Hardly larger than a match

With a housing diameter of only 4 mm, the LVISM is one of the smallest LVDT sensors of its kind. Furthermore, with a length of 7 cm it is not even twice as long as a match.

Despite its miniature housing, the LVDT series offers measuring ranges of up to ±5 mm with an accuracy of up to ±0.25 %. The LVISM is also in no way inferior to its larger relatives when it comes to environmental protection. The LVISM has an IP65 protection class and a temperature range of -25 to +85 °C.

LVDT displacement sensors are ideal for absolute measurements in harsh environmental conditions. Due to their inductive measuring principle, they operate wear-free and are very durable. They are used in all industrial sectors from manufacturing to research.

Connected to external electronics, the LVISM miniature sensor outputs an analog signal of 0 to 10 V or 4 to 20 mA. Thus, the sensor can be connected directly to a control or display device. WayCon offers a practical solution for this with the LVC cable electronics. The LVC has a compact housing (6 x 3.5 cm) and is permanently connected to the sensor cable. Alternatively, the external electronics LVA can be used, which is suitable for safe mounting on a DIN rail.

More News

The tried-and-tested LVDT series LV by WayCon is being expanded with the LV-G, which is equipped with rod end bearings. Thanks to the rod end bearings, the inductive sensors can be directly attached to the object to be measured. Here, the self-orienting rod end bearings facilitate the absorption of transverse force. Attachment via rod end bearings is ideal for installation at the end of a piston rod or the base of a hydraulic cylinder. Regular relubrication of the rod end bearings by the customer can also prolong the life and increase process safety.
With the IMX, WayCon Positionsmesstechnik offers a device that quickly converts input signals (position, frequency, SSI and speed) into absolute analog values. The analog variables of current and voltage can be scaled from 0/4 ... 20 mA and -10...+10 V respectively as desired.
Laser distance sensors of the LAS2-TM series impress with their high precision and their miniature housing.
Eddy current sensors of the EZ1000 series are designed for measurements under the toughest conditions and can be used in areas with explosion hazards. Thanks to the eddy current measuring principle, the measurement is contactless and is not affected by environmental influences such as water, dust or oil.

27.03.2021 01:05

Have you met TEDS?
TEDS (Transducer Electronic Data Sheet) plugs store sensor data like a conventional data sheet. Connected to a measuring amplifier, all required information about the sensor can be read out quickly, easily, and directly.
The WST series Eddy current sensors with a measuring frequency of up to 50 kHz offer the optimal solution for highly dynamic measurements.