Analog Signal Conditioner IMX – a device that’s three in one

With the IMX, WayCon Positionsmesstechnik offers a device that quickly converts input signals (position, frequency, SSI and speed) into absolute analog values. The analog variables of current and voltage can be scaled from 0/4 ... 20 mA and -10...+10 V respectively as desired.

The IMX can read TTL / RS422, HTL differential, HTL PNP and HTL NPN incremental input signals and also has an SSI interface. The analog signal conditioner stands out for its rapid processing of signals up to 1 MHz, which are converted almost instantaneously.

The converted signals are available for further processing at 16-Bit resolution and up to 32-Bit resolution with the SSI interface.

The analog signal conditioner IMX supplies measuring sensors with up to 24 VDC. As a universal signal conditioner, the IMX facilitates linkages with almost all industrial sensors. Six control inputs and outputs maximise the flexibility of the device - and it all comes together in one compact unit. The housing is made of high-quality plastic with a 35 mm DIN rail according to the EN 60715 standard. This makes for a light device weighing just 100 g.

More News

14.02.2022 02:10

Inductive sensor LVDT LV-G - self-orienting rod end bearings for perfect adjustment

The tried-and-tested LVDT series LV by WayCon is being expanded with the LV-G, which is equipped with rod end bearings. Thanks to the rod end bearings, the inductive sensors can be directly attached to the object to be measured. Here, the self-orienting rod end bearings facilitate the absorption of transverse force. Attachment via rod end bearings is ideal for installation at the end of a piston rod or the base of a hydraulic cylinder. Regular relubrication of the rod end bearings by the customer can also prolong the life and increase process safety.

09.07.2021 01:05

Laser Displacement Sensor LAS2-TM - Powerful sensors in a compact design

Laser distance sensors of the LAS2-TM series impress with their high precision and their miniature housing.

26.04.2021 02:10

Eddy current sensors EZ1000 - non-contact measurements for ATEX areas

Eddy current sensors of the EZ1000 series are designed for measurements under the toughest conditions and can be used in areas with explosion hazards. Thanks to the eddy current measuring principle, the measurement is contactless and is not affected by environmental influences such as water, dust or oil.

27.03.2021 01:05

Have you met TEDS?

TEDS (Transducer Electronic Data Sheet) plugs store sensor data like a conventional data sheet. Connected to a measuring amplifier, all required information about the sensor can be read out quickly, easily, and directly.

12.02.2021 06:30

Inductive sensors LVDT series LVISM - Hardly larger than a match

With a housing diameter of only 4 mm, the LVISM is one of the smallest LVDT sensors of its kind. Furthermore, with a length of 7 cm it is not even twice as long as a match.

27.09.2020 01:05

Eddy current probe WST – Non-contact and highly dynamic displacement measurement systems

The WST series Eddy current sensors with a measuring frequency of up to 50 kHz offer the optimal solution for highly dynamic measurements.