Brinkmann Pumps K. H. Brinkmann GmbH & Co. KG

Immersion Pumps are plain centrifugal pumps with the impeller fitted on the driving shaft extension. They are mounted on top of the container, the pump extension being immersed in the coolant. The dim...

Immersion Pumps in Plastics series KTF and KTB are suitable for various water supply problems. These pumps are also suitable for a wide range of chemical liquids. No shaft seal is required, due to the...

Quick Suctioning Immersion Pumps equipped with the patented "BRINKMANN`s Suction De-aeration System" are excellently suited to pumping extremely inflated fluids (emulsions resp. cooling/cutting oils)...

Horizontal End-Suction Pumps are centrifugal inline pumps with a compact design where the impeller is mounted onto the extended motor shaft. These pumps are not self-priming and must be gravity fed. A...

Vertical End Suction Pumps are centrifugal inline pumps with a compact design where the impeller is mounted onto the extended motor shaft. These pumps are not self-priming and must be gravity fed. All...

Pressure Boosting Pumps series TH and FH use closed impellers in order to minimize power consumption and to optimize hydraulic pump efficiencies. In addition, the TH series offers high pressures at sh...

Screw-spindle type immersion pumps attain high pressures and are provided with highly wear-resistant silicon carbide bearing housings and highly rugged spindles. They are suited extremely well for del...

Lifting Pumps series TAA gently pump foam-sensitive cooling lubricants (emulsions or cooling and cutting oils) or highly inflated cooling lubricants such as occur with a high degree of machining in la...

The cutter pumps of the series SPC are desinged to handle and reliably cut long, stringy plastic chips. Because of the higher number of cutting blades which results in an increased cutting frequency a...

Horizontal End-Suction Pumps are centrifugal inline pumps with a compact design where the impeller is mounted onto the extended motor shaft. These pumps are not self-priming and must be gravity fed. A...

Horizontal End-Suction Pumps are centrifugal inline pumps with a compact design where the impeller is mounted onto the extended motor shaft. These pumps are not self-priming and must be gravity fed. A...

Suction Pumps are self-priming following the initial priming, and operate according to the bypass duct principle. We recommend pump models featuring bronze body elements for pumping water without a...