E+E Elektronik GmbH

E+E Elektronik GmbH

  • DIN EN ISO 9001
  • DIN EN ISO 14001
  • IATF 16949

E+E Elektronik GmbH

  • DIN EN ISO 9001
  • DIN EN ISO 14001
  • IATF 16949

About E+E Elektronik GmbH

E+E Elektronik develops and produces sensing elements, modules and sensors for humidity, temperature, dew point, moisture in oil, air velocity, CO2, mass flow and pressure. Data loggers, hand-held measuring devices, humidity calibration systems and professional calibration services round off the comprehensive product range of the Austrian sensor specialist.

E+E Elektronik operates an accredited calibration laboratory in accordance with EN ISO/IEC 17025. As a designated laboratory (NMI), E+E Elektronik has been commissioned by the Austrian Federal Office for Metrology (BEV) to provide the national measurement standards for humidity, dew point, air velocity and Gas concentration CO2.

E+E Elektronik has subsidiaries in Germany, France, Italy, China, Korea and the USA and is well represented by a worldwide dealer network.
No results found.

Miniature dew point meter for refrigeration dryers (EE354)

The EE354 dew point meter is optimised for monitoring refrigeration dryers. The measurement accuracy of ±1 °C (±1.8 °F) over the range of -3...20 °C Td (26.6...68 °F Td)...

Miniature SMD capacitive humidity sensor (HC109)

Typical applications are automotive or home appliances. HC109 humidity sensors are positioned on the PCB at the same time as other SMD components and soldered using the reflow soldering method. The...

Heated Humidity and Temperature Probe for Meteorology (EE260)

Measuring Performance

The EE260 humidity and temperature probe has a dual heating system (sensing element and probe heating). This prevents condensation on the RH sensing element, the se...

4-in-1 Probe (EE872)

4 in 1 Probe Measures CO2, Humidity, Temperature and Pressure

The EE872 from E+E Elektronik measures the CO2 concentration up to 5 % (50 000 ppm) as well as relative humidity, temperature a...

Inline mass flow meter (EE771)

Inline mass flow meter DN15 - DN50

The EE771 is a thermal mass flow meter for compressed air and gases. Irrespective of pressure and temperature, the EE771 flow meter registers mass f...

Temperature Probes

E+E temperature sensors with passive and active (analogue) outputs are optimised for HVAC, building automation and process control. The compact, innovative enclosure design wi...

Humidity Transmitters (Industry)

High accuracy long-term stable transmitters for relative humidity, temperature, dew point and frost point, absolute humidity, wet-bulb temperature, mixing ratio and specific enthalpy. Working range 0....

Humidity Transmitters (HVAC)

Humidity and temperature transmitters for HVAC and building automation, also available as OEM versions and in custom designs.

Humidity and Temperature Probes

Cost-effective humidity and temperature probes in compact design. High accuracy and long-term stability for OEM applications.

Humidity Sensors

High-precision digital and capacitive humidity sensors for mass applications.

Humidity Calibrators (HUMOR 20)

The HUMOR 20 humidity calibrator is a high-end portable reference device traceable to international standards.

Dew Point Sensors

Dew point sensors from E+E Elektronik measure accurately dew point temperature down to -60 °C Td (-76 °F Td), with pressure rating up to 100 bar (1450 psi). A special auto-calibration procedur...

The calibration laboratory of sensor specialist E+E Elektronik has been commissioned by the Austrian Federal Office of Metrology and Surveying (BEV) to provide the national measurement standard (etalon) for CO2 gas concentration. This makes the calibration experts from Engerwitzdorf the highest metrological authority in the country for a further physical quantity following humidity, dew point and air velocity. As the BEV's designated institute, E+E Elektronik is authorised to perform special calibrations at the level of a national metrology institute for these physical quantities.
The EE212 humidity and temperature sensor by E+E Elektronik is suitable for challenging measurement tasks in climate technology, agriculture and the pharmaceuticals industry. Thanks to the modular probe design the sensing module can be easily replaced directly on site if needed. E+E sensor coating, the wide choice of filter caps, and the robust IP65 / NEMA 4 enclosure ensure accurate and reliable measurements even under challenging working conditions.
The Sigma 05 acts as a sensor hub for E+E Elektronik’s intelligent Modbus probes. It makes it easy to set up a modular sensor platform with up to three probes and five measurands. The Sigma 05 supports E+E sensing probes for CO2, humidity, temperature, ambient pressure and air velocity, making it suitable for a wide range of applications.
The EE680 by E+E Elektronik offers high measurement accuracy and is ideal for cleanroom applications due to its GMP-compliant design.
The CO2 Guard 10 reliably measures the CO2 concentration indoors. The measuring device uses an LED traffic light system to indicate when it is time to ventilate.
The EE895 sensor module is ideal for use in climate measuring devices. Pressure and temperature compensation ensure a high CO2 measuring accuracy.