KRASO GmbH & Co. KG

New component to the existing component external Clamp Construction expansion joint tape DA 330/35 according to DIN 18 541 DA 330/35 corner (smooth on one side). Nitriflex, DIN 18541, not bitumen-comp...

Joint tape to install on the upper reinforcement layer. The technical high-quality construction joint tape. Stable perforated plate as inner core coated with flexible plastic. Produced in a special m...

Construction Joint Tape A 150 (company standard) Inboard construction joint tape made of soft-PVC, for construction joints in concrete construction for example floor- and wall connections. Wide: 150 m...

External expansion joint tape made of soft-PVC, for movement joints (room- and compression joints) in concrete construction for example under base plate.

The water pressure tight KRASO Pump Sump saves two to three days of working time and hence money! The KRASO Pump Sump is made of one piece cast of waterproof concrete. The 12 cm thick reinforced walls...

The water pressure tight KRASO Sink-Shaft AGS is specially for super markets which use industrial vacuum cleaners. With the appropriate KRASO Grating Cover you can dispose the waste water of the indus...

The KRASO Pump Sump Type Q is made of light-weight, impact resistant and almost indestructible plastic. Special sizes are available within a few working days!

The KRASO Inspection Chamber - Concrete serves as Control-/Flushing Chamber between the building drainage and the local sewer system.

Made of waterproof concrete, wall thickness according to customer specification, reinforced wall and floor panels

Cable Duct with water pressure tight surrounding KRASO 4 seal: e. g. for the installation inside the buildings for the distribution of cable connection points