KRASO GmbH & Co. KG

Plug-in flange for retrofit sealing of KG/HT pipes

KRASO Floor Drain for installation in interior areas without traffic. Plastic grate (class K3, withstands loads up to 300 kg), for the drainage of grey water. The insert frame can be rotated and is fu...

The frost-proof odour stopper makes the KRASO Floor Drain Type FS particularly well suited for the installation in outdoor areas without traffic. The insert frame makes the screwable stainless steel g...

The frost-proof backwater double stopper makes the KRASO Floor Drain Type FS - RS particularly well suited for the installation in outdoor areas without traffic. The insert frame makes the screwable s...

Floor Drain according to DIN EN 1253, for installation in interior areas without traffic, for the drainage of grey water. With odour stopper, sludge trap filter and plastic grate (class K3, withstands...

Sealing Insert for medium pipes or cables

Material properties KG 2000:

• polypropylene (PP)
• high impact strength
• approval for drinking water protection zone II
• oil-, petrol and grease resistant...

Universal application by lamellar technology, for KRASO Casing Type FE or core drilling, sealing insert for medium pipes or cables.

Sealing Insert for medium pipes or cables

Sealing Insert for medium pipes or cables, split design for retrofit installation.

For installation in areas without traffic and for the connection of 3 intake pipes, for the drainage of grey water. Drainage capacity: 1,8 l/s, slot grate 20 x 20 cm.

Ready to installation in horizontal roof areas e. g. garage roof, subterranean garage, prefabricated garage. Stainless steel clamping flange for later connection of roof sealing sheeting.