Harhues & Teufert GmbH

The new workpiece carrier system can be very easily adapted to your requirements. Virtually any desired length is available, the distance between the individual workpiece carriers can be freely select...

e.g. guide rollers FRWS/FRWSE

• Drill ØI H7 (H8) holes.
• Countersinks for screws DIN912 or DIN 7984 according to DIN 74.
• Screws for DIN 912 o...

e.g.  IFW6 + IFW10

• made of PUR have very good sealing properties with lowest wear tendency
• As a modern sealing element, they are suitable for carrying...

• The new workpiece carrier system features revolving workpiece carriers.
• A precise linear roller guide combined with a high-strength toothed belt with steel tension members, guide t...

• The idler units of the HT series are economical housing bearings for industrial applications
• Together with drawn mating tracks or steel rails, they provide a cost-effective solutio...

e.g. HTLR/HTLRE

The guide rollers are lubricated for life and sealed on both sides with cover washers
For special cases, the guide rollers are available in a NIRO desi...

Back-up rollers with needle bearings

Rust arms or rust-protected series available on request.

The program includes:

• Slewing rings with a diameter from 300 to 750 mm, with a gear ratio from 62 to 150, and the possibility to choose electric or hydraulic gearmot...

• SELFOIL® self-lubricating sintered bearings are porous metallic components made of sintered bronze and sintered iron impregnated with lubricating oil
• The oil contained in the b...

• Order: 110 dxD (Ex: 110 040x053) Required surface finish: Coefficient of friction ? >=0,12
• Surface roughness Rz >=16
• Shaft/hub h8/H8
• Clamping screws DIN91...

Special designs for shaft-hub connections
Bearings for special application - according to customer requirements:

• Axial ball bearings
• Split cylindrical...