FAMAG-Werkzeugfabrik GmbH & Co. KG

For boring deep holes in softwood and European hardwood with power drill and joinery machine. < Ø 24 mm can also be used with cordless screw driver

For boring perfectly fitting holes which are slightly smaller than the nominal diameter. Thus tight fit of the stud bolt in the wood is guaranteed.

For boring deep holes into all hardwoods and also into Bongossi.

Premium one edged auger bit with special ground pevelled tip and very dimensionally stable spirals. Premium coating to grant minimal friction.

Reamer with a blade of 6 mm, square edged

Spiral drill for wood and metal, fully ground and with special brad point. Special ground spiral for the very good chip removal and high rigidity. Ground by CNC-machines.

Conventional dowel marker with centre point and exact fitting. For exact marking of blind dowel holes to all kinds of wood and uncoated boards. Good dimensioned point guarantees perfect working.

The first carbide tipped Forstner Bit with brad point, carbide-tipped main cutting edge and carbide-tipped wave-form cutting teeth. Freehand drilling to all types of wood: soft and hard wood, European...

Forstner Bit with wave-form cutting teeth, two main cutting edges and brad point. Rapid drilling in softwood, European hardwood, chipboard, MDF etc. Rapid material removal of solid wood and chipping b...

Customary Forstner Bit with brad point, two main cutting edges and circumference cutter. Exactly ground by robots, right-hand cut. Tear free accurate holes in softwood, glued laminated timber etc. Spe...

Long Forstner Bit with wave-form cutting teeth, two main cutting edges and brad point. Easier to resharp as the normal Forstner Bit. Rapid drilling in softwood, European hardwood, chipboard, MDF etc....

Bormax with exchangeable brad point, also to pre-drill. Included in the delivery: Bormax with exchangeble brad point/pilot drill, center point, pre-drill Ø 4 mm and one MEX Key.