FAMAG-Werkzeugfabrik GmbH & Co. KG

Two carbide tipped, changeable side and end cutting blades parallel to the shank. The blades are constructed in an angle of 90° and one blade can be used as cutting bit. For grooving, cutting finger j...

Soil Auger with forged welded spiral. The drill has a T-handle made of metal and with the aid of a plug extending indefinitely prolongable. For drilling holes for garden fence, plants, frames, telepho...

Two edged hole cutter, long version, with a small slope and with diameter scale at the chip flute. Continous drilling without pre-drilling also to very thin sheets without distorting the sheet at the...

Two edged hole cutter. Continous drilling of big holes and boring up holes of thin-walled materials.

Two edged hole cutter, cylindrical gradation and scale of diameter. The hole cutter drills and simultaneously deburrs with the following step.

Countersink three edged, countersinking angle of 90°. Countersinking and deburring in all metals.

Countersink with 5 edges and either with wooden or plastic handle. For fast countersinking by hand.

Twist drill with long shank and specially ground rooflike tip which can easily be reground. Construction according to DIN 7490 and the applicable safety regulations. For boring external and internal f...

Twist drill with long shank and specially ground rooflike tip which can easily be reground. Construction according to DIN 7490 and the applicable safety regulations. For boring external and internal f...

For boring paling fences into stringers or handrails of staircases. Only recommended for hardwood.

For fast predrilling and countersinking of screw connections with flat head. Boring and countersinking in all wooden materials and many plastics.

For exact drilling into all wooden materials, hardwood and laminated boards. Shank constructed for drill chuck Ø 13 mm. Left hand cut.