Conductor rails Manufacturers, Distributors & Service Providers online

Conductor rails Manufacturers online

Busbars or conductor rails are electrical conductors that are used to distribute electrical energy in buildings, industrial plants or transportation systems.

They are a central component of modern energy distribution systems and offer an efficient, space-saving and safe solution for power supply.

Below you will find an overview of the functionality and types of busbars, as well as an overview of the areas of application and their advantages and the challenges involved in their use:

How busbars work:

The functionality of conductor rails is based on the conduction of electric current through rigid or flexible metallic conductors. The most important components and principles are

Components of a conductor rail:

Conductor: Mainly made of copper or aluminum to minimize electrical resistance.
Insulation: Protects the conductor rail from short circuits and contact voltage. The insulation is often made of plastic or epoxy resin.
Housing: A mechanical protective housing made of metal or plastic protects the conductor rail from external influences such as dust, moisture or mechanical loads.
Connection terminals and current collectors: Facilitate the integration of the conductor rail into the electrical system and enable the connection of consumers or sub-distribution boards.

Types of busbars:

Monorail systems: For simple power distribution systems, e.g. in small installations.
Multi-rail systems: For more complex applications, e.g. in high-voltage systems or data centers.
Flexible busbar trunking: Enables flexible installation and adaptation to buildings or machines.

Use of busbars:

Busbars are used in many areas as they enable efficient, flexible and safe power distribution.

1. Building technology:
Distribution of electrical energy from central substations to different floors or areas of a building.
Track-based lighting systems that connect and supply luminaires directly.
Integration of busbars into smart home systems to combine power distribution and control.

2. Industrial applications:
Supply of machines, robots or production lines in factories.
Use in high-voltage and low-voltage control cabinets for distributing and controlling electricity.
Use in crane systems, conveyor systems or assembly lines, often in conjunction with sliding contacts.

3. Transportation:
Conductor rails as an energy source for electric trains, streetcars and subways, often as a third rail next to the tracks.
Used in modern charging technologies for electric vehicles or automated transportation systems.

4. Renewable energies:
In solar and wind power systems to collect and distribute the electricity generated.
In storage systems to connect batteries, inverters and loads.

5. Data centers:
As energy distribution systems. Busbars enable a flexible and space-saving power supply for server racks and IT infrastructure.

Advantages of busbars:

Busbars require less space than conventional cable bundles and simplify the planning of power distribution systems.
These systems are particularly suitable for applications with high currents, e.g. industrial systems or transportation systems.
Busbars conduct current with lower resistance compared to cables, as they have larger cross-sections and lower skin and proximity effects.
The rails are designed for high currents and can cope better with peak loads.
They make it easy to adapt or expand the system, e.g. by adding new loads.
The flat design dissipates heat better, which increases the service life.
Busbars allow consumers to be connected directly without additional cables and connection points.
Thanks to high-quality insulation and protective housings, busbars offer a high level of operational safety.

Challenges of using busbars:

Initially more expensive than cables, but often amortized by longer life and lower maintenance costs.
The installation of busbars requires specific know-how, especially for high-current applications.
While cables can be easily rerouted, rescheduling busbars requires more effort.
If not properly protected, busbars can corrode in aggressive environments.

Busbars are an efficient and reliable solution for power distribution in many areas of application, from building technology to industrial systems and rail transportation. They offer advantages such as high current-carrying capacity, space-saving design and easy maintenance, but require professional planning and installation. Thanks to their modularity and safety, busbars remain a preferred choice for modern power distribution requirements.

Here is an overview of the most important criteria to consider when buying busbars:

Buying busbars requires a careful analysis of requirements and conditions to ensure an efficient, safe and economical power distribution solution. The following overview covers all the key aspects that should be considered.

The busbar must be designed for the operating voltage (e.g. low voltage <1 kV, medium voltage up to 36 kV) and the maximum current (continuous current and peak current).
Single-phase or three-phase systems depending on the application (e.g. households, industrial plants).
Take into account special requirements for direct current (DC).
The busbar should be able to safely withstand high short-circuit currents (e.g. 25 kA for 3 seconds).
Select the conductor material suitable for the intended application. Copper has excellent conductivity and is therefore ideal for high currents, but is more expensive. Aluminum is cheaper and lighter, but less conductive, so larger cross-sections are required.
Coatings such as tin plating, nickel plating or other protective coatings may be required to prevent oxidation and corrosion.
Select the appropriate design for your requirements:
Flat busbars save space and are easy to install. These are suitable for switch cabinets or confined spaces.
Closed systems with an additional protective housing are recommended for harsh environments or outdoor applications.
Flexible busbars are intended for applications with movement or in confined spaces, e.g. for machines or robots.
The rail must be stable enough to withstand loads caused by vibrations, movements or tensile forces.
Ensure that the rail is suitable for the maximum temperature rise during operation.
A space-saving design is required, especially in switch cabinets or in cramped installations.
Ensure there is sufficient space for cooling, maintenance and safety clearances.
Pre-assembled modules reduce installation time and sources of error.
Busbars with plug-in or screw-on connections make installation easier.
The busbar should be designed for the planned application range, e.g. from -40 °C to +120 °C.
Good heat dissipation to prevent overheating and increase service life.
Ambient conditions, especially humidity and water: protection classes according to IP classes (e.g. IP65 or IP68) for humid environments.
Corrosion protection is particularly important in aggressive environments (e.g. salty air in coastal regions or chemical plants).
For outdoor applications, the insulation should be resistant to UV radiation.
Electromagnetic compatibility (EMC) is necessary to avoid interference with sensitive electronics.
Observe standards and certifications: IEC 61439 as the standard for low-voltage switchgear and controlgear assemblies. VDE standards for electrical safety and quality in Germany. UL certifications for the American market.
Look out for ATEX approval. This is required for potentially explosive atmospheres.
Halogen-free materials minimize the development of smoke and toxicity in the event of fire.
Flame-retardant coatings reduce the risk of fires spreading.
Insulated or enclosed rails offer greater protection against electric shock.
Ensure that the conductor rail is effectively earthed.
Aluminum is cheaper than copper, but less conductive. Low conductor resistance reduces losses and saves energy costs in the long term.
High-quality materials and systems pay for themselves through longer service life and less maintenance.
Maintenance-free systems avoid operational failures and reduce long-term costs.
Easily accessible and replaceable modules save time during repairs.
Choose modular conductor rail systems that can be easily extended.
Manufacturers who offer customized solutions are often advantageous for special requirements.
Long warranty periods and reliable customer support are crucial.
Choose materials that are recyclable and have a low environmental impact. Avoid environmentally hazardous substances (e.g. RoHS compliant).
Low energy losses during transmission contribute to sustainability.
Note that the conductor rails can be recycled at the end of their service life.
Ensure that the conductor rail is compatible with existing systems.
Consider the availability of suitable accessories such as brackets, protective covers or connecting elements.
Check the supplier's delivery times, especially for individual adaptations.

When purchasing conductor rails, it is crucial to carefully analyze the technical requirements, environmental conditions, safety standards and economic aspects. High-quality busbars offer a durable, safe and efficient solution for energy distribution. Early planning and the selection of a reliable supplier are key factors for successful installation and use.

Busbars can be purchased from various suppliers. Comprehensive information about manufacturers and suppliers of Busbars from all over the world can be found on Exportpages.