Resistance meters Manufacturers online

Resistance meters are electrical measuring devices that can be used to measure the different resistance values of electrical conductors or components.

The electrical resistance indicates how strongly the flow of current is inhibited by a material and is specified in ohms (Ω). Resistance meters are used in almost all areas of electrical engineering, electronics, maintenance and quality assurance.

Below is an overview of how they work, the basic measuring methods of resistance meters, their use and modern developments in this field:

How resistance meters work:

Resistance meters basically work according to Ohm's law, which describes the relationship between voltage (U), current (I) and resistance (R): R = U / I
The device itself either generates a defined electrical voltage or a current and measures the other value.
It calculates the resistance from this.
Depending on the measuring range and accuracy, a distinction is made between simple devices for everyday use and high-precision laboratory instruments.

Basic measuring methods of resistance meters:

1. Two-wire measurement (2-wire method):
   This is the simplest method. Voltage and current flow through the same wires.
   The contact and lead resistance is also measured, which can lead to inaccuracies - especially with very small resistances.
2. Four-wire measurement (Kelvin measurement):
   Here, two separate wires are used for current and two for voltage.
   This means that the voltage drop is only measured at the test object itself, without being influenced by contact resistances.
   This method is standard for measuring small resistances in the milliohm or microohm range.
3. Bridge method (e.g. Wheatstone bridge):
   This method compares the unknown resistance with known resistances in a bridge circuit.
   It allows particularly precise measurements, especially in high-quality measuring devices and in calibration technology.
4. Pulse and alternating current measurements:
   In certain applications, such as inductance or earthing measurements, the resistance is determined using alternating current or pulsed direct current. This allows interference to be minimized or additional information (e.g. frequency behaviour) to be obtained.

Use of resistance meters:

Resistance meters are indispensable in a variety of technical and industrial areas. Their applications range from simple testing of electrical cables to high-precision analysis in laboratories and manufacturing processes.

1. Fault diagnosis and maintenance:
In electrical installations and in the service sector, resistance measuring devices are used to:
Localize line breaks or short circuits.
Check contact or contact resistances.
Assess the condition of heating wires, coils or fuses.
Test the insulation condition (in combination with insulation measuring devices).

2. Quality assurance in production:
In the production of electronic components and assemblies, resistance values are measured in order to:
Verify components (resistors, heatsealing bands, sensors).
Check soldered connections.
Check the uniformity of current conductors or contacts.
Create test protocols for safety-relevant products.

3. Calibration and laboratory applications:
In metrology laboratories or research environments, high-precision resistance meters are used to:
Calibrate standard resistors.
Perform reference measurements.
Determine temperature coefficients.
Create accurate electrical models of components.

4. Safety and earthing measurements:
For earthing systems, lightning protection systems or explosion-proof equipment, accurate measurement of the earthing resistance is crucial.
Special devices with alternating current measurement are used for this purpose, which record the earth conditions realistically.

5. Automotive and energy technology:
In automotive engineering, resistance measuring devices are used to check sensors (e.g. temperature or lambda sensors), wiring, plug connections or control units.
In power engineering and high-voltage systems, they are used to measure contact resistances on busbars, switching contacts or high-current connections.

Modern developments in resistance meters:

• Multimeters with resistance measurement function:
  Widely used in electrical engineering, easy to use and sufficiently accurate for many tasks.
• Milliohmmeter / microohmmeter:
  Specialized devices for very small resistance values, often with four-wire connection.
• Bridge meters:
  High-precision laboratory devices for reference measurements, e.g. in calibration laboratories.
• Handheld devices with data logger:
  Ideal for service calls, documentation of test results and long-term monitoring.
• PC-supported test stations:
  Can be integrated into industrial production, with automated control and statistical evaluation.

Resistance meters are fundamental tools in electrical engineering and are used to check, maintain and develop electrical systems. Depending on the requirements, different measuring methods are used - from simple multimeters to high-precision bridge instruments. The choice of the right device depends largely on the area of application, the required accuracy and the resistance range to be measured. In an increasingly electrified and digitalized world, precise resistance measurement remains an indispensable part of modern technology.

Here is an overview of the most important points to consider when purchasing resistance meters:

When purchasing resistance meters, it is crucial to make a selection based specifically on the technical requirements, the operating environment and the long-term operating costs. An unsuitable device can lead to measurement errors, failures in the application or high follow-up costs.

• First of all, the resistance range to be measured should be clarified - from microohms to the megaohm range:
• For small resistances in the milliohm or microohm range, e.g. for contact or earthing loops, specialized milliohm or microohm meters are required, often with four-wire measurement.
• For medium to high resistances, e.g. for component testing or general measurements, multimeters or laboratory devices with good resolution and accuracy are often sufficient.
• The resolution of the device should be significantly finer than the smallest measured value to be expected in order to obtain meaningful results.
• Professional applications require high measurement accuracy and reliable repeatability. This depends on:
• The internal stability and quality of the device.
• The measurement method used, e.g. four-wire technology to avoid contact resistance.
• Temperature compensation and immunity to electromagnetic interference.
• The accuracy must match the application: In manufacturing, for example, a higher accuracy is often required than for simple maintenance.
• Resistance meters use different measuring methods:
• Two-wire measurement for simple applications with moderate resistances.
• Four-wire measurement (Kelvin measurement) for very low resistances - this prevents systematic errors due to line influences.
• For very high resistances, the insulation test must also be observed - an insulation measuring device with a high test voltage range may be required.
• The connection type, e.g. crocodile clips, Kelvin clips, test needles, should be suitable for the application and be interchangeable.
• There are different designs depending on the area of application:
• Hand-held devices for mobile use in service, maintenance or field service.
• Desktop devices for laboratory use with a wider range of functions.
• Rackmount devices for automated installation in test systems.
• PC-supported modules for integration into automated production and test processes.
• User guidance should be intuitive, with a clear display, easy-to-understand menus and, if necessary, touch or key input. A robust housing and ergonomic design facilitate daily use.
• In professional applications, traceable measurement logs and data exports are often mandatory - for quality assurance, traceability or calibration reports, for example. The device should therefore have the following options:
• Digital interfaces such as USB, RS-232, Ethernet or Bluetooth.
• Support for protocols such as SCPI for remote control or LabVIEW compatibility.
• Internal storage function or direct connection to PC/cloud systems.
• Optional software for analysis, visualization and reporting.
• A professional resistance measuring device must be regularly calibratable - ideally traceable to national or international standards, e.g. ISO 17025:
• Calibration certificates should be supplied by the manufacturer or an accredited laboratory.
• Information on recommended calibration intervals and calibration history should be documented.
• Some devices offer internal self-calibration or automatic calibration recognition.
• Calibratability is particularly important in safety-relevant sectors such as medical technology, aviation and energy technology.
• Depending on the place of use, the device may be exposed to external influences, e.g. in industrial plants, under voltage influences or outdoors. The device should therefore:
• Be shielded against electromagnetic interference (EMC).
• Have overvoltage protection or safety isolators.
• Be suitable for the temperature and humidity range of the environment and, if necessary, meet protection classes such as IP54 or higher, especially for outdoor use.
• For mobile applications, the power supply is a critical point:
• Battery-powered devices with a long runtime and battery level indicator are ideal for on-site testing.
• For stationary use, safe mains operation should be possible - with a stabilized power supply unit and emergency power supply if necessary.
• A low weight and a sturdy carrying case increase the practicality for field service.
• A professional purchase also takes into account the reliability of the manufacturer:
• Is the supplier established and specialized in measurement technology?
• Is there professional support (hotline, repair service, training)?
• Are firmware updates or software enhancements provided on a regular basis?
• Are there testimonials or certifications from relevant industries?
• A cheap no-name provider can become significantly more expensive in the long term if support, spare parts or updates are missing.
• A cheap device can quickly prove uneconomical due to follow-up costs or a lack of possible applications. Conversely, a higher investment value can be justified by productivity and reliability.

The purchase of resistance meters requires more than just a comparison of technical data. The decisive factors are a precise selection for the measuring range, application and environment, as well as long-term aspects such as calibration capability, data interfaces, manufacturer support and total cost of ownership. If you check these factors carefully, you not only ensure the quality of your measurements, but also the efficiency and reliability of your testing processes.

Resistance meters can be obtained from various suppliers. You will find comprehensive information on manufacturers and suppliers of Resistance meters around the world on Exportpages.