Standard parts Manufacturers online

Standard parts are standardized components such as screws, springs, pins and bolts, dowel pins, seals and couplings that are used in many technical areas to increase efficiency and interoperability.

They are manufactured according to national or international standards, which means that their dimensions, shapes, materials and tolerances are precisely defined. This allows them to be easily interchangeable and compatible between different applications and manufacturers.

Below you will find the definition and examples of standard parts, areas of their use, the most important standards, the advantages and disadvantages as well as modern developments in standard parts:

What are standard parts?

Standard parts are components that are produced according to defined standards. These standards are defined by official standardization organizations such as the German Institute for Standardization (DIN), the International Organization for Standardization (ISO) or the American National Standards Institute (ANSI). These parts are mass-produced and are used in a wide variety of technical areas.

Examples of standard parts:

Standard parts cover a wide range of components. The most commonly used standard parts are

• Screws, nuts and bolts: fasteners used in almost all machinery and construction applications.
• Washers: Distribute the load of nuts and bolts evenly to protect material and ensure a stable fastening.
• Springs: Mechanical components that store and release energy (e.g. compression or extension springs).
• Pins and bolts: Hold components together or fix them in a specific position.
• Dowel pins: Used for the precise positioning and fixing of components to each other.
• Seals: Prevent liquids or gases from escaping from a system.
• Couplings and joints: Transmit movements or forces between two mechanical components.

Use of standard parts in practice:

Standard parts are used in numerous areas, including:

1. Mechanical engineering:
Here, standard parts are found in almost all components, from the housing to the motor to the moving parts.

2. Construction industry:
Screws, nails, dowels and other fasteners are manufactured according to standards to ensure stable and safe structures.

3. Automotive industry:
Numerous standard parts such as screws, nuts and seals are used in vehicles to connect components such as the engine, transmission and bodywork.

4. Electrical engineering:
Terminals, plugs and other electrical connections are often standardized to ensure compatibility between different manufacturers and systems.

5. Aerospace:
Standard parts are also used in aviation as they provide reliable and standardized quality that must function under extreme conditions.

Important standards for standard parts:

The main organizations that set standards for standard parts are:

• ISO (International Organization for Standardization): An international organization that sets standards for numerous industries. Examples are ISO 4017 for hexagon head screws or ISO 7090 for washers.
• DIN (German Institute for Standardization): National standardization organization in Germany. Examples are DIN 933 for hexagon head screws or DIN 125 for washers.
• ANSI (American National Standards Institute): The US standards organization that sets standards for various industries.

These standards cover various aspects, such as:

• Dimensions (length, diameter),
• Materials (e.g. stainless steel, steel, plastic),
• Tolerances (permissible deviations from the nominal dimensions),
• Mechanical properties (e.g. strength classes for screws).

Advantages of using standard parts:

Standard parts offer numerous advantages, both technical and economic:

• Standard parts are produced in large quantities, which reduces manufacturing costs. Companies do not have to have customized parts made, which saves additional costs.
• As standard parts are standardized and widely used, they are available from many suppliers worldwide. This makes purchasing easier and reduces waiting times.
• Standard parts are interchangeable between different manufacturers and systems. This means that a part can easily be replaced by an identical part from another manufacturer.
• Compliance with standards ensures consistent quality. This reduces the risk of manufacturing errors or unsuitable parts.
• Engineers and designers do not have to concern themselves with the development of special parts. They can fall back on proven solutions, which simplifies and speeds up the development process.
• As standard parts can often be used in several projects or machines, it is not necessary to stock a large variety of different parts.

Disadvantages of standard parts:

Despite the many advantages, there are also some potential disadvantages to using standard parts:

• Standard parts are standardized and cannot always meet the specific requirements of an application. In these cases, special parts must be designed.
• Although standard parts are manufactured according to fixed standards, there can still be differences in manufacturing quality between different manufacturers. It is therefore important to look out for reliable suppliers.
• Standard parts are generally widely available, but supply bottlenecks can occur for particularly large projects or specific standards.

Modern developments in standard parts:

As manufacturing technologies and material sciences have evolved, so have standard parts:

• There are increasing efforts to produce standard parts using 3D printing, especially for small series or prototypes.
• High-performance plastics, special alloys and composite materials are opening up new fields of application for standard parts, particularly in areas with extreme requirements (e.g. aerospace, medical technology).
• Modular standard parts are increasingly being used in automation technology and robotics, enabling flexible adaptation and expansion of systems.

Standard parts are an integral part of modern technology and design. They offer numerous advantages such as cost efficiency, availability and high quality assurance. Thanks to their standardization, they can be used in a wide range of industries and applications. However, when purchasing and using standard parts, the specific requirements of the application, such as choice of material, strength class and standards, should be taken into account in order to achieve the best results.

Below you will find an overview of the most important criteria that you should pay attention to when purchasing standard parts:

When buying standard parts, there are a number of factors to look out for to ensure that they meet the requirements of the application and will work reliably over the long term.

• Make sure that the standard part complies with the correct standard. In Germany, DIN standards are common, while ISO standards are often used internationally. ANSI standards are also used for the US market. Check whether the standard of the part is compatible with the requirements of your application.
• Make sure that the part meets all necessary technical specifications (e.g. dimensions, tolerances, material properties).
• The material should meet the requirements of your application. Important materials for standard parts are
• Steel: Particularly resilient, but susceptible to corrosion (except coated variants).
• Stainless steel: Corrosion-resistant and durable, ideal for damp or aggressive environments.
• Plastic: Lightweight and often cheaper, but not as resilient as metals.
• Brass or aluminum: Used for special applications, e.g. in electronics or mechanical engineering.
• Corrosion resistance: For outdoor applications or in humid environments, you should look for corrosion-resistant materials such as stainless steel or galvanized steel.
• Check whether the standard part has a special surface treatment such as galvanizing, chromium plating, burnishing or powder coating. These treatments extend the service life and protect the component against corrosion and other environmental influences.
• In some applications, e.g. in mechanical engineering or medical technology, a smooth, clean surface is important. Choose the right coating here.
• Make sure that the manufacturing tolerances of the standard part meet the requirements of your application. Tight tolerances are particularly necessary in precise applications, such as in mechanical engineering or the automotive industry.
• Precise standard parts are necessary to ensure perfect assembly and functionality.
• Screws and other fasteners are classified according to their strength class (e.g. 8.8, 10.9, 12.9). The higher the number, the greater the tensile strength and hardness. Select a strength class that is suitable for the load of your application.
• Make sure that the standard part has sufficient mechanical strength to withstand the forces occurring in your application.
• If the standard part is used in environments with extreme temperatures, the material should be selected accordingly. Stainless steel and special alloys are often more temperature resistant than ordinary steels.
• In chemical or aggressive environments, standard parts made of materials such as stainless steel or plastic that are resistant to chemical attack should be selected.
• In machines or systems that are exposed to strong vibrations, standard parts with sufficient strength and impact resistance should be selected
• Standard parts should be readily available. Make sure that the supplier has a sufficient quantity in stock, especially for large projects.
• If you need standard parts at regular intervals or in larger quantities, you should check the supplier's delivery time and reliability.
• Choose manufacturers or suppliers with a good reputation and proven quality. Reputable manufacturers often deliver consistently high quality and have strict quality controls.
• Make sure that the manufacturer has quality certificates such as ISO 9001. These certificates stand for high quality in production and ensure consistent quality.
• In safety-critical applications, e.g. in aerospace, medical technology or automotive engineering, standard parts often have to meet strict safety requirements and certifications. Make sure that the part complies with the necessary certifications (e.g. CE marking).
• Make sure that the standard parts comply with the applicable safety regulations and standards.
• Compare prices from different suppliers, but be sure to consider not only the price, but also the quality and long-term reliability of the part. Cheaper parts may cost more in the long run if they need to be replaced more frequently.
• Consider the long-term costs of standard parts, including maintenance, replacement and possible downtime costs due to inferior parts.
• Ensure that standard parts are properly and securely packaged, especially for large shipments or sensitive parts.
• Check the supplier's logistics options, especially if you need standard parts regularly or in large quantities.
• Check that the standard part is easily compatible with other components in your application. One advantage of standard parts is their interchangeability, but this assumes that they comply exactly with the applicable standards.
• In certain applications, such as automation technology, it is important that standard parts have a modular design and can be flexibly adapted to different systems.

When purchasing standard parts, the appropriate standard, choice of material, strength class, tolerances and surface finish should be taken into account to ensure that the part meets the technical and mechanical requirements. It is also important to pay attention to manufacturer quality, availability, safety requirements and price-performance ratio. Careful selection of standard parts can ensure high quality, long service life and cost efficiency.

Standard parts can be obtained from various suppliers. Comprehensive information on manufacturers and suppliers of Standard parts from all over the world can be found on Exportpages.