Kübler Group - Fritz Kübler GmbH

SIL3/PLe safety module for safe speed monitoring with one encoder system

SMC1.1 is a compact safety module of the Safety-M family with integrated drive monitoring for one axis with a safe encoder system. This stand-alone speed monitor (basic module) does not require an additional safe PLC.
Safety-M compact is optimal for integration into existing safety circuits or for upgrading old machines. Solutions with a safe encoder (SinCos) are supported for safe speed detection.

• extensive library for preconfigured safety sensors and command devices. This allows for easy parameterization and no programming.
• Full speed-related safety functions for drive monitoring equivalent to EN 61800-5-2 integrated in firmware (e.g. STO, SS1, SS2, SOS, SLS, SSM, SDI).
• Integrated signal splitter for forwarding encoder signals (optional). No complex, interference-prone external wiring if the controller wants to use the same signals.
• The signal converter can output the encoder signal as SinCos, HTL, RS422 or as analog value 4 ... 20 mA.
• Simple mounting, can be snapped onto 35 mm C-profile rail.
• 4/2 safe inputs, 8/4 safe shutdown channels, 1 safe 1-channel potential-free relay contact.
• Contact multiplication or contact amplification by external contactors in connection with integrated monitoring possible (EDM).
• Front LED always shows operating status.
• Removable operating and diagnostic display (optional).
• Free parameterization software "OSxx".