KULLEN-KOTI GmbH
- Manufacturer
- Germany
- Website
- Send product inquiry
- Phone
KULLEN-KOTI GmbH
- Manufacturer
- Germany
- Website
- Send product inquiry
- Phone
- DIN EN ISO 9001:2015
- DIN EN ISO 14001
KULLEN-KOTI GmbH
- Manufacturer
- Germany
- Website
- Send product inquiry
- Phone
- DIN EN ISO 9001:2015
- DIN EN ISO 14001
DBS-Spiral Roller Brushes (220, 221) by KULLEN-KOTI GmbH
The types 220 & 221 are extremly flexible in their dimension and depending on the required performance these endless spiral brush coils are mounted on core systems made of mild steel, stainless steel or non ferrous metals. Compared with other brush designs we can reach the highest possible fill density with these types and they can be applied with a maximum speed of 55 m/sec without any problems. Supposition for it, is that the roller brush cores are electrodynamically balanced after the mounting of the core according to the required rotation speed and quality G 2.5 which comes up to ISO 1940.
Our roller brushes are supplied with a fill surface perfectly trimmed and/or ground for concentricity. A perfectly seated attachment of the coils on the roller core is guaranteed by the pressure or mounting ring (PRB) system, also available with removable balancing weights (PRB-AW), which prevents the brush coil from rotating on the core.
In some circumstances you also could choose a simpler fastening of the brush coil onto the core, i. e. without mounting rings but by spot-welding the helixes at each end of the brush core. Almost all fill material qualities can be used. The maximum wire or filament diameters are mentioned in the table showing the various inside or core diameters (KD) of spiral brushes.
Product advisor: Tanja Frey
More Products in the Area of Roller brushes
Single Section Roller Brush (Type 964)
The roller brush type 964 is made of single section brushes mounted together on a core up to the required face width. This roller brush type can be mounted on cores made from stainless steel, plast...