ACE Stoßdämpfer GmbH

Isolators with large deflection for all spatial axes

Heavy-duty bearing for low excitation frequency
Natural frequency 3.7 Hz to 14.1 Hz

For good stability in harsh environments:

These pot elements provide protection even in difficult environments. This is achieved through ideal absorption of axial stresses and the associated limitation of lateral deformations. Soft bell mounts are tear-proof and therefore also suitable for applications with high safety requirements.

In addition to various rubber compounds, they are also available from ACE in stainless steel versions. Designed for a temperature range of -40 °C to 70 °C, they can be mounted in all spatial axes, which means they can be used in push, push and pull directions.

The soft bell mounts from ACE keep harmful vibrations away, especially from generators, motors and systems that run at a frequency of around 25 Hz. This makes them ideal for pumps and generating sets.

Technical data
Natural frequency: 3.7 Hz to 14.1 Hz
Permissible temperature range: -40 °C to +70 °C

Environment resistant to UV radiation

Material

outer body: galvanized steel

insulation medium: natural rubber

Areas of application:

Machines and systems, compressors and ventilation systems, electronic systems, military, generators, pumps

Note
Tear-proof

Installation instructions
Installation possible in all spatial axes. Can be used for loads in the push, push and pull direction.

On request
Also available in other rubber compounds. Also available in stainless steel on request.