Catalog
BECOME A PARTNER
BECOME A PARTNER
Catalog

Perndorfer Maschinenbau KG

Perndorfer Maschinenbau KG

  • ISO 9001:2015

Perndorfer Maschinenbau KG

  • ISO 9001:2015

Back to the overview

WSS special plant for machining dished ends (WJC Tube 2500/6000 ) by Perndorfer Maschinenbau KG

Product inquiry  

WJC custom system to cut tubes, Klopper heads, and flat materials.

Key features:
• Cantilever XL and full 3D cutting head
• Cutting basin 9,000 x 3,500 x 3,500 mm, embedded into the bottom
• Lifting towers for setup above water and to cut tubes under water for tubes D =150 to 2,500 mm; L = up to 6,000 mm; H = up to 10 t • Automatic drift compensation
• • Flatbed area to cut sheet material 3,000 x 2,000 x 600 mm
• • Cutting Klopper heads with a diameter of up to 2,000 mm

Product inquiry  

More Products in the Area of Waterjet cutting machines

Waterjet cutting machines (WJC HE Cantilever)

Waterjet cutting machines (WJC HE Cantilever)

The WJC cantilever is equipped for a wide range of tasks and will work reliably every single day be it during one shift or multiple shifts. Perndorfer’s WJC machines win over with functional con...

Waterjet cutting machines in the gantry design (WJC HE Gantry )

Waterjet cutting machines in the gantry design (WJC HE Gantry )

The gantry design is usually used when the working width exceeds 2,500 mm. As with the cantilever design, the machine can be used simultaneously to set up and cut if the working surfaces are large....

3D Water Jet Cutter (WJC 3D )

3D Water Jet Cutter (WJC 3D )

To work on Klopper heads, welded assemblies, complex three-dimensional geometrics, and other material with more space.

This machine has a large z axis hub and a full 3D cutting head which g...

Clean Water Jet Cutter (WJC RW 5-Head )

Clean Water Jet Cutter (WJC RW 5-Head )

Soft materials like foam or rubber are best cut with pure water and without adding an abrasive. These cutting machines which are typically used in the series production of flat gaskets, foam cuttin...

Pure water jet cutting system (WJC RW 12-Head )

Pure water jet cutting system (WJC RW 12-Head )

“Dynamic plus”

The Dynamic Plus is a pure waterjet cutting machine that can be equipped with twelve or more cutting heads. It is suitable for both small and lar...

By using this website you agree to our use of cookies as described in our Privacy Policy.
I Agree