Catalog
BECOME A PARTNER
BECOME A PARTNER
Catalog

Perndorfer Maschinenbau KG

Perndorfer Maschinenbau KG

  • ISO 9001:2015

Perndorfer Maschinenbau KG

  • ISO 9001:2015

Back to the overview

Waterjet cutting machines (WJC HE Cantilever) by Perndorfer Maschinenbau KG

Product inquiry  

The WJC cantilever is equipped for a wide range of tasks and will work reliably every single day be it during one shift or multiple shifts. Perndorfer’s WJC machines win over with functional construction, sophisticated technology, and a clear-cut design. When working with compact measurements it works at full capacity and is therefore also suitable if space is limited.

  • Cantilever design (accessible from three sides)
  • Working surface: 1,000 x 1,000 mm – 12,000 x 2,000 mm
  • Other sizes available upon request.
The cantilever is constructed and calculated using the latest CAD and FEM technology. A huge welded steel construction guarantees the highest level of stiffness.

Up to a working width of 2,500 mm there are no disadvantages compared to the gantry design – we guarantee that with our good name. Even in the case of machines with more than one cutting head the entire working area can be covered with the main cutting head.
 

Product inquiry  

More Products in the Area of Waterjet cutting machines

Waterjet cutting machines in the gantry design (WJC HE Gantry )

Waterjet cutting machines in the gantry design (WJC HE Gantry )

The gantry design is usually used when the working width exceeds 2,500 mm. As with the cantilever design, the machine can be used simultaneously to set up and cut if the working surfaces are large....

3D Water Jet Cutter (WJC 3D )

3D Water Jet Cutter (WJC 3D )

To work on Klopper heads, welded assemblies, complex three-dimensional geometrics, and other material with more space.

This machine has a large z axis hub and a full 3D cutting head which g...

Clean Water Jet Cutter (WJC RW 5-Head )

Clean Water Jet Cutter (WJC RW 5-Head )

Soft materials like foam or rubber are best cut with pure water and without adding an abrasive. These cutting machines which are typically used in the series production of flat gaskets, foam cuttin...

Pure water jet cutting system (WJC RW 12-Head )

Pure water jet cutting system (WJC RW 12-Head )

“Dynamic plus”

The Dynamic Plus is a pure waterjet cutting machine that can be equipped with twelve or more cutting heads. It is suitable for both small and lar...

Pure water jet cutting system (WSS RW 8-Kopf )

Pure water jet cutting system (WSS RW 8-Kopf )

"Revolving shuttle table system”

Machines with several revolving shuttle tables have proven themselves in series production with large quantities as well as wherever...

By using this website you agree to our use of cookies as described in our Privacy Policy.
I Agree