Catalog
BECOME A PARTNER
BECOME A PARTNER
Catalog

E+E Elektronik Ges.m.b.H.

E+E Elektronik Ges.m.b.H.

  • DIN EN ISO 9001
  • DIN EN ISO 14001
  • IATF 16949

E+E Elektronik Ges.m.b.H.

  • DIN EN ISO 9001
  • DIN EN ISO 14001
  • IATF 16949

Back to the overview

Heated Humidity and Temperature Probe for Meteorology (EE260) by E+E Elektronik Ges.m.b.H.

Product inquiry  

The EE260 humidity and temperature probe with heated humidity sensing element and probe heating delivers precise and reliable measuring results even at high humidity conditions.
 

Measuring Performance

The EE260 humidity and temperature probe has a dual heating system (sensing element and probe heating). This prevents condensation on the RH sensing element, the sensing head and the filter cap. The probe therefore provides precise and reliable measurement results even in the case of permanent high humidity.

Another benefit of the dual heating system is the very short response time and a fast recovery after condensation.

The E+E sensor coating improves the long-term stability and service life in dusty and corrosive environments.

Compact and Robust

The innovative enclosure of the EE260 combines a heated humidity sensing head and an additional temperature sensing element in a single probe.

Due to its compact design, the probe is compatible with commercially available rotationally symmetric sensor radiation shields.

The robust IP67 enclosure made of UV- and heat-resistant elastomer protects the internal electronics from environmental influences and mechanical damage.

Analogue and Digital

The EE260 probe provides the measured data simultaneously on two freely configurable voltage outputs and via the RS485 interface (Modbus RTU).

Based on the measured humidity and temperature values, the EE260 calculates further humidity-related quantities such as the dew point temperature, absolute humidity or mixing ratio.

Typical Applications
  • Meteorological weather stations
  • Weather warning systems (road traffic, airports)
  • Detection of icing hazard
Key Features
  • Excellent measurement performance and high accuracy in the high humidity range
  • Compact, robust IP67 enclosure
  • Heated RH sensing element and heated sensing head
  • Two freely configurable voltage outputs
  • Integrated T sensing element
  • RS485 interface with Modbus RTU protocol
  • Short response time and a fast recovery after condensation
  • Calculation of all relevant humidity related quantities
  • E+E sensor coating against pollution and corrosion for best long term stability
  • Compatible with rotationally symmetric sensor radiation shields

Product inquiry  

More Products in the Area of Humidity sensors

Humidity sensors (EE23)

Humidity sensors (EE23)

The EE23 is a cost optimised, reliable sensor for industrial and high-end climate control applications in the range -40...180 °C (-40...356 °F). It measures accurately relative humidity (RH...

Humidity/temperature sensor (EE212)

Humidity/temperature sensor (EE212)

The EE212 humidity (RH) and temperature (T) sensor with interchangeable sensing module is optimized for demanding climate control applications in most various industries.

Versatilit...

Humidity and Temperature Probe with Digital Output (EE07)

Humidity and Temperature Probe with Digital Output (EE07)

The EE07 digital probe is available in polycarbonate and stainlees steel enclosure and measures accurately humidity and temperature over a wide temperature range.

With the choice of appropriat...

By using this website you agree to our use of cookies as described in our Privacy Policy.
I Agree