Catalog

Thermik Gerätebau GmbH

Thermik Gerätebau GmbH

  • DIN EN ISO 9001

Thermik Gerätebau GmbH

  • DIN EN ISO 9001

Back to the overview

Temperature Monitoring (Termistores-PTC LTM) by Thermik Gerätebau GmbH

Product inquiry  

Where possible, the PTCs are to be inserted parallel to the coil. As a result, when shaping the coil ends, the mechanical stress of the PTCs is minimised. In so doing, the Mylar®-­Nomex® shrink cap is highly suited to this purpose due to its mechanical stability (no cold flow in contrast to Teflon®). In connection with the miniature pill (Ø 1.5 mm) response times of 5 to 10 seconds (max.) are achieved depending on the version.

Thermik thermistors correspond to DIN 44081 and/or 44082, IEC 60034-11-2 and are characterised by high resistance to temperatures. Resistance increases greatly in the range of the rated response temperature. Via a trigger device, this change can be used to shut down the load current circuit. Electronic evaluations in are also possible in different applications.

Product inquiry  

More Products in the Area of Temperature Monitoring Systems

Thermal Protection Devices

  • Round thermal protectors
  • Flat thermal protectors
  • Pressure-resistant thermal protectors
  • Sealed thermal protectors
  • Current-independent thermal protector...