Kübler Group - Fritz Kübler GmbH

Strain gauge control unit (strain gauge) with totalizer function.

The Codix 566 process control unit with totalizer function displays measured values from all common strain gages in high resolution and monitors and controls 2 limit values.
These fast displays set new standards in terms of user-friendliness. Thanks to easy-to-read 14-segment LED displays, comprehensible scroll help texts and a practical quick reference card, there is no need to read extensive manuals.
Optionally also available with analog output.

User-friendly

Practical quick-start card for parameterization and operation of the instrument
Help text as scrolling text
Easy-to-read 14-segment LED display, 6-digit, 14 mm high
Simple programming via 4 front keys
One front key and 2 additional inputs can be programmed for specific applications.
Customized characteristic via 12 interpolation points for all measuring signal inputs
Min-max memory individually resettable

Powerful

Measuring rate of 10 measurements/second
Application-specific characteristics over 12 measuring points
Manual totalizer function for summing up the measured values, separately resettable
2 relay outputs (changeover contacts) for limit value monitoring with hysteresis and on/off delay function for current measuring oron/off delay function for current measured or totalizer values
Analog output for current measured value, min. value, max. value or totalizer value
Sensor voltage supply 10 V DC / 30 mA for supplying 350 Ohm measuring bridges
Inputs and outputs electrically isolated
Digital filter 1st order for smoothing display values. Order for smoothing display fluctuations with unstable input signals
Tare function