Targeted precision ginding and polishing with stream finishing

OTEC Präzisionsfinish GmbH

"Targeted precision ginding and polishing with stream finishing" by OTEC Präzisionsfinish GmbH

With accuray down to the last micron, surface problems on stabilised kknee implants are a thing of the past

The knee joint is a hinge joint that also allows a certain degree of rotation. It’s also the largest hinge joint in the human body. Knee prostheses come in various forms, but for patients with unstable ligaments or bone loss, doc-tors use the stabilised type, also known as axially supported. The two components (the femoral implant and the metal platform) are joined by a stabilising hinge.

The functional feature of these prostheses is a “box” with inner geometry. And therein lies the mechanical processing challenge, because conventional techniques quite literally can't hit the target.

It’s all about the angle
OTEC Präzisionsfinish has the solution: stream finishing – the technology behind a whole new generation of mass finishing machines. In this procedure, the workpieces are clamped in a holder and lowered into a rotating container filled with an abrasive or polishing medium. The workpiece rotates and is processed as the medium circulates around it. SF is capable of performing multiple processing steps very quickly in a single operation, which means a workpiece can be rapidly deburred, rounded, smoothed and polished in sequence and with no additional workload. When it comes to inner geometries like those on stabilised knee implants, this has two key advantages: first, a contour-controlled motion sequence and second, an adjustable workpiece angle. These features make it possible to target the media flow at specific sections of a workpiece for particularly intensive processing. And that translates to effective results in minimal time. Material abrasion can be controlled and it's also possible to set precise roughness parameters based on the process: with initial work-piece values of Ra 0.8–1.2 µm you can achieve outstandingly smooth target values of up to Ra 0.01 µm.

The benefits at a glance: processing stabilised knee implants with OTEC stream fin-ishing technology on the SF-3/3:
• Uniform surfaces
• Consistent workpiece quality
• Process reliability
• No manual finishing
• Up to three knee joints in one pass
• Process/process time in two steps:
1. Wet grinding approx. 40–60 min; 2. Dry polishing approx. 16–20 min
• No programming required

It runs like clockwork: SF Series automation with Robot Loading System (RLS)
When processing large volumes of workpieces, short loading and set-up times make your operations far more efficient. That’s where our automatic robot loading system comes in (the SF RLS, see left). SF Automation Series machines can be fitted with optional pulse finishing and work well, for example, in cyclic production lines. Depending on your requirements, the machines can either be set up for automatic loading or fitted with it as an integrated option. The machine design is modular and there-fore easy to adjust to cycle time. The SF Automation can thus be easily integrated as a key element of any production line.

Give your surfaces an OTEC precision finish
At OTEC, we aim to deliver not just the right machine and holder for each workpiece and surface fin-ishing requirement, but also the ideal abrasive and a customised process. We adapt, or indeed develop, a specific solution based on your needs. Put us to the test: send us some samples and our inhouse Finishing Center will specify your process free of charge. To ensure that it’s reproducible and efficient, with perfect surfaces every time, we'll establish and professionally document all the rele-vant process technology parameters.

Free sample processing:

About OTEC Präzisionsfinish
OTEC GmbH Präzisionsfinish provides precision technology for achieving perfect surfaces. OTEC machines are used for smoothing, precision edge-rounding, polishing and deburring a wide variety of workpieces, with the aim of improving surface quality. OTEC has a global presence supported by in-ternational business partners. OTEC’s comprehensive, market-leading technical expertise in developing the perfect interplay of machine and abrasive benefits a wide range of industries including tooling, medical devices, jewellery, and automotive and aerospace.

OTEC Präzisionsfinish GmbH | Heinrich-Hertz-Strasse 24 | 75334 Straubenhardt-Conweiler
Tel. + 49 (0) 70 82 - 49 11 20 | Fax + 49 (0) 70 82 - 49 11 29 |

More News

OTEC's disc finishingand electropolishing duo
Tests for the production of new metals in space
The special requirements of laser cut parts
Quality and accuracy in the manufacture of high-precision parts
Heinrich-Hertz-Strasse 24
Business Type
Export Regions
DIN EN ISO 9001:2015
Dipl.-Ing. (FH) Helmut Gegenheimer
Dipl.-Betriebswirt (BA) Soran Jota

About OTEC Präzisionsfinish GmbH

OTEC Präzisionsfinish GmbH in Straubenhardt develops and manufactures innovative machines for cost-effective high-precision surface finishing. In only ten years the company has expanded rapidly to become one of the world’s leading technology companies in this sector. Today, OTEC has a worldwide distribution network providing local services to its international customers.