HYDROKOMP Hydraulische Komponenten GmbH

These cylinders are used, if the clamping force has to be applied to the workpiece laterally. Regarding the force application, the design requires horizontal and vertical components of force. The vert...

Pressure monitoring cylinders are used in hydraulic systems that are not connected to a pressure generator. They convert hydraulic signals into mechanical signals that can be evaluated by means of ele...

The mounting tool enables easy replacing the system seal of the coupling mechanisms. These seals are subject to wear in daily use as a result of contamination and metal filings. The tool enhances the...

Rotary joints are used to connect pressure-retaining lines from stationary positions to rotating or swivelling machine parts. Their function is to prevent torsion and bends at moveable lines. The join...

Rotary Couplings transmit hydraulic oil from a fixed to a rotating machine part. Depending on the number of junction levels several single-/double-acting hydraulic elements can be connected. Also spec...

Rotary valve couplings transmit hydraulic oil to revolving tables. They permit several hydraulic jigs to be supplied simultaneously with oil and independently of that, a loading/unloading station to c...

Pneumatic rotary couplings transmit pressure air from a stationary to a rotating machine part. They can be combined with electronical rotary connections by slip rings for 6, 12, 18 or 24 strands. Vers...

Pressure intensifiers increase a fixed ratio between two piston surface areas. With this method it is possible, e.g. to use a low-pressure machine hydraulic system for loads, which require a higher op...

These pressure pump units are intended for simple clamping jigs. The pressure is adjusted by a pneumatic upstream maintenance unit. The pressure pump units are available with pedal or hand lever for s...

The hydraulic reservoir is a part of the "Manual Coupling System”. By stocking of hydraulic oil, it ensures the pressure balance during a low pressure drop in the clamping system. Hydraulic reservoirs...

Hydraulic check valves are part of the shut-off valves according to DIN ISO 1219. They produce decompression. Before opening the valve piston, the opening of the unlocking piston is dampened. Pressure...

Pressure reducing valves are ideal for the application in static leak-oil free clamping systems which are decoupled from the pressure generator. They maintain the outlet pressure at the load also with...