cab Produkttechnik GmbH & Co. KG

Two successively arranged thermal transfer printing units for simultaneous printing of two colors in one document. The XC4 and XC6 meet all the criteria of the new classification and labeling system f...

Single-sided printing for textiles. The additionally installed drive roller after the printhead enables the textiles to be reliably separated from the ribbon. No adjustment of the printhead for differ...

For simultaneous front and rear printing of textiles. The additionally installed drive roller after the printhead enables the textile material to be reliably separated from the ribbon. No adjustment o...

The PX has been designed for fully automatic print and apply in technically demanding environment. PX enables printing/applying in any position and can be integrated in every production line. The robu...

MAESTRO 2 the reasonable model to start with, suitable for smaller numbers of PCBs. MAESTRO 2M separates large numbers of PCBs without fatigue of the operator. The lower circular blade is motor driven...

MAESTRO 3E separates small and large PCBs. The table and the rest can be adjusted to the most suitable working position. The slit between the linear blade and the rest can be adjusted to ensure that t...

The MAESTRO 4S separates both large and small PCBs quickly, economically and without stress. Cutting with only a single traverse of the pre-scored groove causes tensile and compressive stresses that c...

PCB panels with a max. width of 310 mm can be separated by up to 11 circular blades simultaneously.  Configuration of the blades is adjusted to your individual PCB also the cover and the guide. The ma...