Catalog

SPECK Pumpen Verkaufsgesellschaft GmbH

SPECK Pumpen Verkaufsgesellschaft GmbH

SPECK Pumpen Verkaufsgesellschaft GmbH

About SPECK Pumpen Verkaufsgesellschaft GmbH

Moving water and other liquids: what sounds so easy depends crucially on experience and know-how. SPECK Pumpen has convincing technologies and solutions worldwide; for industry and commerce, for public and communal facilities and for private households. “Our enthusiasm for the best technology is the innovative strength that has driven us for over 100 years, from generation to generation. Profit from the quality and reliability of an owner-managed company. You’ll be impressed.”

Piston Pumps (PM Pumpmeister/BS Büffelpumpe)

SPECK piston pumps, with electrically isolated motor draw rocker, V-belt pulley, V-belt, type-tested membrane safety valve, return valve, base plate and belt guard, are used for pumping drinking and g...

High Pressure Unit (P)

Application examples:

  • High pressure cleaning - mobile or stationary
  • Pressing pipes, hoses or fittings etc.
  • Reverse osmosis and desalination of seawater...

Pressure Booster plants

  • Compact
  • Low noise operation
  • Fully-automatic
  • Ready for connection
  • Easy to install
The booster units contain 1 6 non-self-priming, staged c...

Submersible Motor Pumps (TOP)

The stainless steel submersible pumps from the TOP range are especially suitable for handling clean, clouded or slightly contaminated water, for example ground water, rainwater and clarified sludge. T...

Swimming Pool Filters (BADU Star)

Field of application:
Pool water filtration in privately owned pools, can be installed max. 3 m above or below water level. Doesn't require a waste water connection since it requires no b...

Centrifugal Pumps (VGX/2VGX)

Thermoforming technology allows new solutions. The CrNi steel housing, a spiral housing, creates a higher rate of efficiency and a reduction in noise levels when pumping water. The monoblock design of...

Multi-Purpose Pumps (SG/SGM)

The single phase motor is fitted with an overload protection switch; the motor bearings are lubricated for life. The maintenance-free mechanical seal is designed for continuous operation. The pump typ...

Industrial pumps (IN-VB(-S))

Staged centrifugal pumps from the IN-VB(-S) range are multistage, vertical centrifugal pumps in an IN-LINE design. The non-self-priming centrifugal pumps distinguish themselves through a high rate of...

Liguid Ring Vacuum Pump

The liquid ring vacuum pumps are suitable for vacuum generation up to max. 33 mbar a. Due to the construction, damp gases or steam can also be evacuated. Made from varying materials and with a variety...

Rotary Vane Pumps (DS)

  • Easy to install
  • Version with magnetic coupling is leakage and maintenance-free
  • Minimal volume differences due to displacement principle
Field of applicati...

Non-self-priming Chemical Pump (BC 42/.. and 43/..)

Single stage, non-self-priming monoblock pumps with bellows-type mechanical seal mounted in the plastic impeller hub.
They are driven by air-cooled asynchronous motors, 1~ or 3~, 50 Hz, motor spe...

Norm Pumps

Robust design with proper dimensioned wall thickness and solid workmanship, thorough final check at the test facility (long service life even under harsh operating conditions).
Block design allow...