FAMAG-Werkzeugfabrik GmbH & Co. KG

For pre-drilling and countersinking the holes in a single operation.

Boring and countersinking (90° or 180°) in a single operation. Production according to drawing or information of the desired sizes and design.

Two-stepped machine drill. First bit with point angle, core drill with two cutting lips.

Cylinder boring bit with centre hole for exchangeable dowel pins or pilot drills. 2 main edges and 2 roughing taps for clean cut. Ø > 50 mm 3 clamping surfaces. For countersinking on a right-angled su...

Carbide tipped cylinder boring bit with center hole for exchangeable dowel pins or pilot drills. 2 main edges and 2 roughing taps, ground by diamond wheels on CNC-machines for long endurance. For coun...

Countersink with 7 edges and point angle, irregular pitch and parallel shank. Now with fully ground tool head.

Machine countersink with bored hole with one edge and countersinking angle of 90°.

Stable L-shaped driver with casing made of aluminium and aslant toothed metal gear wheels (ideal transmission). Take up for all 1/4“ bits and boring tools (e.g. 1596) with hex shank. Angle of screwing...

Clamp ring to put on twist drills with lateral attachment screw.

Multi purpose hole saw carbide tipped, the saw body is made of steel, cutting depth 165 mm. Drilling in all kinds of woods and boards( also solid wood), MDF, aerated concrete, plaster board and plasti...

Special hole saw to install roller blinds on window frames. Incl. Hex shank and pre-drill to place the hole saw in position. During the installation of the roller blinds you have to drilling holes in...

6 hole saw blades, centre drill and arbor with hexagon shank, cutting depth ca. 30 mm. For cutting wood, plasterboard, plastics, building boards etc.